For a current customer project i need the following EXOS functionality:
All MAC Authentication go to RADIUS Server1 and Server2
All dot1x Authentication go to RADIUS Server 3 and Server4
currently i can only determine the used RADIUS Server by the realm - management or netlogin - not the Authentication Method.
So my customer miss this functionality.
As a workaround i address Server1 (and 2) for all methods and do a forwarding an this server at back-end to server 3/4 for dot1x.
This is working - but doing this "routing" direct on the switch would be prefered by my customer.
Additionally this will help in some troubleshooting situations.