Header Only - DO NOT REMOVE - Extreme Networks

Is it possible to set the Radius accounting interval in EXOS?


Userlevel 1
Or, could somebody tell me exos how often sends radius interim update records?

4 replies

Userlevel 4
To the best of my knowledge, EXOS doesn't support to manually set 'interim-update' interval. I think it can be determined by adding 'Acct-Interim-Interval' attribute in 'Access-Accept' message on the radius server side.
Userlevel 1
Kevin Kim wrote:

To the best of my knowledge, EXOS doesn't support to manually set 'interim-update' interval. I think it can be determined by adding 'Acct-Interim-Interval' attribute in 'Access-Accept' message on the radius server side.

Thanks, Kevin.

I tried to push it to our switch wit EXOS 16.1.3.6.p1-4, but it looks it ignores it. I didn't get any accounting updates.
Userlevel 4
Kevin Kim wrote:

To the best of my knowledge, EXOS doesn't support to manually set 'interim-update' interval. I think it can be determined by adding 'Acct-Interim-Interval' attribute in 'Access-Accept' message on the radius server side.

If you don't see an interim update with the 'Acct-Interm-Interval' attribute properly piggybacked in an 'Access-Accept' message to a switch, please contact our GTAC for further assistance.
Userlevel 4
Kevin Kim wrote:

To the best of my knowledge, EXOS doesn't support to manually set 'interim-update' interval. I think it can be determined by adding 'Acct-Interim-Interval' attribute in 'Access-Accept' message on the radius server side.

Unfortunately, it's confirmed that EXOS doesn’t support Interim update accounting message even if it receives Access-Accept with Acct-Interim-Interval Radius Attribute.

Reply