We've been using the RADIUS attribute to set wireless client VLANs on Aerohive AP250s for 18 months on a campus with 180+ AP250s. Everything has been stable and working and not seen any issues with the client VLAN assignement since it was setup.
After upgrading 18 AP’s located in one building to 10.0.9.1 (10.0r9a), WiFi clients are are now appearing on the AP management VLAN and not the one that should be assigned by attribute, Only affects the SSID using 802.1X RADIUS, clients of the SSID using a PSK aren't affected.
I tried a PoE cycle of the affected AP’s but continued to see clients appearing on the management VLAN.
Since the AP’s that hadn’t been upgraded continued to work correctly I downgraded back to 10.0.8.1 (10.0r8a) and they are now all working with wireless clients being assigned to the correct VLAN set by the RADIUS tunnel-pvt-group attribute.
Has something changed with the way this feature works, or is there an issue with 10.0r9a firmware ?