Data Center (MLX & CER/CES)

 View Only

 Ironware secondary image was not upgraded on the Line cards on MLX-4

thaizoun's profile image
thaizoun posted 10-20-2020 15:45



I was able to successfully upgrade an MLX-4 to version 6.2.00d.Yet , when i issue the show flash command , the S1 through S4 show that the primary Ironware was upgraded to 6.2.00d , however the secondary image did not get upgraded to 6.2.00d

 o IronWare Image (Primary)
    Version 6.2.0dT177, Size 9571326 bytes, Check Sum fc39
    Compiled on Jun  6 2019 at 01:50:00 labeled as xmlp06200d
  o IronWare Image (Secondary)
    Version 5.9.0T177, Size 9485930 bytes, Check Sum 880f
    Compiled on Feb 24 2016 at 07:27:20 labeled as xmlp05900b1

this is the command i used to perform the upgrade

copy tftp system all-images x.x.x.x manifest MLX06200d_Manifest.txt   


Please advise

tmasuda's profile image

copy tftp flash x.x.x.x xmr06200d.bin secondary

copy tftp lp x.x.x.x xmlp06200d.bin secondary all

thaizoun's profile image

Thank you kindly for your prompt response to my inquiry.

I will go head and perform the action you recommended


Thank you again