ExtremeWireless (WiNG)

 View Only

 How do I create route between two VLANS on Wing 7

Matheus Santana's profile image
Matheus Santana posted 01-10-2022 09:09
I have two Vlans created on an AP310, VLAN 1 and 70.  The Vlan70 works from a NAT of Vlan1 and yours dhcp server is created inside the AP310.
I need that Vlan70 communicate completely with vlan1, but I can't access the services of vlan1 from vlan70.
Christopher Frazee's profile image
Christopher Frazee
Hello Matheus,
       Can you please provide the running-config, especially the NAT ip access list and AP interface configuration?

Thanks,
Chris Frazee
Douglas Novell's profile image
Douglas Novell
Hello,

Please see this NAT configuration article to validate the WiNG configuration: https://extremeportal.force.com/ExtrArticleDetail?an=000082886

If configured correctly please provide the running-config or open  TAC case for support using the available methods found here: https://extremeportal.force.com/ExtrArticleDetail?an=000080454

Thank you