ExtremeSwitching (EXOS)

 View Only
Expand all | Collapse all

EXOS 16.1.1 supports VLAN IDs (VID)s

  • 1.  EXOS 16.1.1 supports VLAN IDs (VID)s

    Posted 05-12-2016 14:26
    Did you know ...
    In EXOS 16.1.1, over 50 VLAN commands were enhanced to support VID lists/ranges to simplify configuration.

    E.g. create vlan 10-20
    Creates VLANs with the VIDs 10,11,12 etc...
    EXOS still uses VLAN names internally so the VLAN names are created for you as VLAN_0010, VLAN_0011 etc ...

    The list of commands below were all enhanced to accept which is the numeric VID form for VLANs.

    A can be comma or dash separated numbers:

    E.g.: 2,3,5-35 (VID 2,3 and all VIDs in the range of 5-35)

    Here's the list of CLI commands that were enhanced.

    code:
    clear l2stats vlan
    code:
    configure ip-mtu vlan
    code:
    configure policy maptable [response [tunnel | policy | both] | ]
    code:
    configure policy profile {name } {pvid } {pvid-status } {cos } {cos-status } {egress-vlans } {forbidden-vlans } {untagged-vlans } {append | clear} {tci-overwrite } {precedence } {mirror-destination } {clear-mirror | prohibit-mirror | syslog } {trap } {disable-port } {fst } {web-redirect }
    code:
    configure ports [ | all] monitor vlan {rx-only | tx-only}
    code:
    configure ports {tagged} vlan [limit-learning { action [blackhole | stop-learning]} | unlimited-learning]
    code:
    configure ports {tagged} vlan [lock-learning | unlock-learning]
    code:
    configure {stpd} add vlan ports [all | ] {dot1d | emistp | pvst-plus}
    code:
    configure {stpd} delete vlan ports [all | ]
    code:
    configure vlan [ | ] add ports [all | ] {tagged | untagged} {stpd} {dot1d | emistp | pvst-plus}
    code:
    configure vlan [ | ] add ports [ | all] {tagged | untagged | private-vlan translated }
    code:
    configure vlan [ | ] delete ports [ | all]
    code:
    configure vlan [ | ] protocol {filter}
    code:
    configure vlan [ | ] {qosprofile} [ | none]
    code:
    configure vman [ | ] delete ports [ | all]
    code:
    configure vman [ | ] ports [ | all] delete cvid { - }
    code:
    configure vman [ | ] protocol {filter}
    code:
    configure vman [ | ] {qosprofile} [ | none]
    code:
    create vlan {vr } {description }
    code:
    create vman {vr } {description }
    code:
    delete vlan
    code:
    delete vman
    code:
    disable {stpd} auto-bind vlan
    code:
    [enable | disable] iparp gratuitous protect vlan
    code:
    [enable | disable] ipforwarding {ipv4} vlan
    code:
    [enable | disable] ipforwarding ipv6 vlan
    code:
    [enable | disable] learning [ vlan | vman ]
    code:
    [enable | disable] learning [ vlan | vman ]
    code:
    [enable | disable] loopback-mode vlan
    code:
    [enable | disable] vlan
    code:
    enable {stpd} auto-bind vlan
    code:
    show fdb stats vlan
    code:
    show fdb vlan {netlogin  [all | mac-based-vlans]}
    code:
    show iparp security vlan
    code:
    show iparp stats vlan
    code:
    show iparp vlan
    code:
    show ip dad vlan {tentative | valid | duplicate}
    code:
    show ip-security arp learning vlan
    code:
    show ip-security arp validation violations vlan ports [|all]
    code:
    show ip-security arp validation vlan
    code:
    show ip-security dhcp-snooping entries vlan
    code:
    show ip-security dhcp-snooping information-option circuit-id vlan-information vlan
    code:
    show ip-security dhcp-snooping violations vlan
    code:
    show ip-security dhcp-snooping vlan
    code:
    show ipv6 dad vlan {tentative | valid | duplicate} {detail}
    code:
    show l2stats vlan
    code:
    show neighbor-discovery {cache {ipv6}} vlan
    code:
    show netlogin authentication [service-unavailable | failure] vlan
    code:
    show netlogin guest-vlan
    code:
    show netlogin {port } vlan
    code:
    show netlogin {port } vlan dot1x detail
    code:
    show policy maptable { }
    code:
    show vlan security
    code:
    show vlan statistics
    code:
    show vlan stpd {blocked-ports}
    code:
    show [vlan | vman ] {ipv4 | ipv6}
    code:
    show [vlan | vman ] {ipv4 | ipv6}
    code:
    show vrrp vlan {stats}
    code:
    unconfigure policy maptable [ response | ]
    code:
    unconfigure ports [ | all] monitor vlan
    code:
    unconfigure vlan ipaddress
    code:
    unconfigure vman ipaddress


  • 2.  RE: EXOS 16.1.1 supports VLAN IDs (VID)s

    Posted 05-12-2016 14:30
    Awesome work, thanks Dave!


  • 3.  RE: EXOS 16.1.1 supports VLAN IDs (VID)s

    Posted 05-12-2016 14:53
    It's cool. Thanks!