ExtremeSwitching (EXOS)

Expand all | Collapse all

What do I need to have to stack X460-48P switches

  • 1.  What do I need to have to stack X460-48P switches

    Posted 05-24-2017 15:50
    What do I need to have to stack X460-48P switches


  • 2.  RE: What do I need to have to stack X460-48P switches

    Posted 05-24-2017 15:57
    Hi Bill, below have a link where you can find the all informations about stacking on Exos:

    https://gtacknowledge.extremenetworks.com/articles/Q_A/Where-Can-I-Find-the-EXOS-Stacking-Tool

    Att


  • 3.  RE: What do I need to have to stack X460-48P switches

    Posted 05-24-2017 16:00
    Hi Bill,

    In addition to the Stacking Tool that Jefferson mentioned, please use the steps outlined in the following GTAC Knowledge base article to configure and enable stacking on your X460-48p switches:

    https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-stack-with-Summit-X460-48p-a...

    Please let us know if you have any questions.
    Thank you.

    Best regards,
    Andrew



  • 4.  RE: What do I need to have to stack X460-48P switches

    Posted 05-24-2017 16:04
    The stacking tool, which Jefferson referenced, is very helpful. In addition, here's a link to a page from the Hardware Installation Guide with specific stacking considerations for X460 switches.

    Larry Kunz
    Information Development
    Extreme Networks


  • 5.  RE: What do I need to have to stack X460-48P switches

    Posted 05-24-2017 16:15
    Thanks guys that was the info I needed. Guess I am ordering some hardware.


  • 6.  RE: What do I need to have to stack X460-48P switches

    Posted 05-24-2017 16:00
    Andrew, Thanks for your support !!!