ExtremeSwitching (EXOS)

Expand all | Collapse all

How to migrate the configuration code from entrasys to EXOS?

  • 1.  How to migrate the configuration code from entrasys to EXOS?

    Posted 09-28-2018 05:54
    Hi now i change the the entrasys to Exos 450-G2. so how to migrate the code. now i attached my entrasys code. kindly help me.

    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.07.25 13:06:39 =~=~=~=~=~=~=~=~=~=~=~=
    show config
    This command shows non-default configurations only.
    Use 'show config all' to show both default and non-default configurations.

    begin
    !
    #***** NON-DEFAULT CONFIGURATION *****
    !
    !
    # Firmware Revision: 06.81.08.0005
    !
    #ip
    set ip protocol none
    !

    #security
    !

    #system
    set switch member 1 3
    set switch member 2 3
    set switch member 3 3
    set switch member 4 3
    set system name "inblr1sw001"
    set system location "IN-BLR1-GHSSP-LVL11"
    set system contact "[removed]"
    set system temperature syslog enable trap enable
    set system login admin super-user enable password :[removed]:
    set system login raraj1 super-user enable password :[removed]:
    set system login mgmt-v3 super-user enable password :[removed]:
    set system login support super-user enable password :[removed]:
    set system login haagkon1 super-user enable password :[removed]:
    clear system login ro
    clear system login rw
    !

    #vlan
    set vlan create 100
    set vlan create 101
    set vlan create 200
    set vlan create 201
    set vlan create 300
    set vlan create 301
    set vlan create 302
    set vlan create 303
    set vlan create 400
    set vlan create 401
    set vlan create 402
    set vlan create 403
    set vlan create 500
    set vlan create 501
    set vlan create 600
    set vlan create 601
    set vlan create 900
    set vlan create 1000
    set vlan name 100 "Infrastructure"
    set vlan name 101 "Infrastructure_B"
    set vlan name 200 "Server"
    set vlan name 201 "Server_B"
    set vlan name 300 "User"
    set vlan name 301 "User_B"
    set vlan name 302 "User_WLAN"
    set vlan name 303 "User_D"
    set vlan name 400 "VoIP"
    set vlan name 401 "VoIP_B"
    set vlan name 402 "VoIP_C"
    set vlan name 403 "VoIP_D"
    set vlan name 500 "Target"
    set vlan name 501 "Target_B"
    set vlan name 600 "Project"
    set vlan name 601 "Untrust"
    set vlan name 900 "Guest"
    set vlan name 1000 "Noris_Transfer"
    clear vlan egress 1 ge.1.1-4;ge.1.6-48;ge.2.1-48;ge.3.1-48;ge.4.1-48;lag.0.1-6
    set vlan egress 100 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 100 ge.1.36 untagged
    set vlan egress 101 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 200 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 201 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 300 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 301 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 302 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 302 ge.1.3-4;ge.1.6;ge.2.3-6 untagged
    set vlan egress 303 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 400 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 401 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 402 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 403 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 500 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 501 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 600 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 601 ge.1.45-48;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 601 ge.1.7;ge.1.10;ge.2.10 untagged
    set vlan egress 900 ge.1.3-6;ge.1.45-48;ge.2.3-6;ge.2.45-48;ge.3.45-48;ge.4.45-48;lag.0.1-6 tagged
    set vlan egress 900 ge.1.2;ge.2.2 untagged
    set vlan egress 1000 ge.1.1;ge.2.1 untagged
    !

    #Router Configuration
    router
    enable
    configure
    ip route 0.0.0.0 0.0.0.0 10.64.49.233
    interface vlan 100
    ip address 10.64.48.1 255.255.255.0
    ip helper-address 10.5.139.200
    ip helper-address 10.0.11.44
    ip helper-address 10.0.8.40
    no ip icmp redirect enable
    no shutdown
    exit
    interface vlan 101
    ip address 10.64.49.1 255.255.255.128
    ip helper-address 10.5.139.200
    ip helper-address 10.0.11.44
    ip helper-address 10.0.8.40
    no ip icmp redirect enable
    no shutdown
    exit
    interface vlan 200
    ip address 10.64.50.1 255.255.255.0
    ip helper-address 10.5.139.200
    ip helper-address 10.0.11.44
    ip helper-address 10.0.8.40
    no ip icmp redirect enable
    no shutdown
    exit
    interface vlan 300
    ip address 10.64.52.1 255.255.255.0
    ip helper-address 10.5.139.200
    ip helper-address 10.0.11.44
    ip helper-address 10.0.8.40
    no ip icmp redirect enable
    no shutdown
    exit
    interface vlan 301
    ip address 10.64.53.1 255.255.255.0
    ip helper-address 10.5.139.200
    ip helper-address 10.0.11.44
    ip helper-address 10.0.8.40
    no ip icmp redirect enable
    no shutdown
    exit
    interface vlan 302
    ip address 10.64.54.1 255.255.255.0
    ip helper-address 10.5.139.200
    ip helper-address 10.0.11.44
    ip helper-address 10.0.8.40
    no ip icmp redirect enable
    no shutdown
    exit
    interface vlan 303
    ip address 10.64.55.1 255.255.255.0
    ip helper-address 10.5.139.200
    ip helper-address 10.0.11.44
    ip helper-address 10.0.8.40
    no ip icmp redirect enable
    no shutdown
    exit
    interface vlan 400
    ip address 10.64.56.1 255.255.255.0
    ip helper-address 10.5.139.200
    ip helper-address 10.0.11.44
    ip helper-address 10.0.8.40
    no ip icmp redirect enable
    no shutdown
    exit
    interface vlan 401
    ip address 10.64.57.1 255.255.255.0
    ip helper-address 10.5.139.200
    ip helper-address 10.0.11.44
    ip helper-address 10.0.8.40
    no ip icmp redirect enable
    no shutdown
    exit
    interface vlan 500
    ip address 10.64.60.1 255.255.255.0
    ip helper-address 10.5.139.200
    ip helper-address 10.0.11.44
    ip helper-address 10.0.8.40
    no ip icmp redirect enable
    no shutdown
    exit
    interface vlan 600
    ip address 10.64.62.1 255.255.255.0
    ip helper-address 10.5.139.200
    ip helper-address 10.0.11.44
    ip helper-address 10.0.8.40
    no ip icmp redirect enable
    no shutdown
    exit
    interface vlan 1000
    ip address 10.64.49.234 255.255.255.248
    no ip icmp redirect enable
    no shutdown
    exit
    exit
    exit
    exit
    !

    #arp
    !

    #arpinspection
    !

    #authentication
    !

    #banner

    set banner motd "\n*------------------------------------------------\n| System ID:\tinblr1sw001 10.64.49.234\n| Location:\t IN-BLR1-GHSSP-LVL11\n| Contact:\t [email removed]\n*------------------------------------------------\n"
    !

    #cdp
    set cdp state disable
    !

    #cep
    !

    #ciscodp
    set ciscodp status disable
    !

    #console
    !

    #dhcp
    !

    #dhcpsnooping
    !

    #dos
    !

    #eapol
    set eapol auth-mode forced-auth ge.1.1
    set eapol auth-mode forced-auth ge.1.2
    set eapol auth-mode forced-auth ge.1.3
    set eapol auth-mode forced-auth ge.1.4
    set eapol auth-mode forced-auth ge.1.5
    set eapol auth-mode forced-auth ge.1.6
    set eapol auth-mode forced-auth ge.1.7
    set eapol auth-mode forced-auth ge.1.10
    set eapol auth-mode forced-auth ge.1.45
    set eapol auth-mode forced-auth ge.1.46
    set eapol auth-mode forced-auth ge.1.47
    set eapol auth-mode forced-auth ge.1.48
    set eapol auth-mode forced-auth ge.2.1
    set eapol auth-mode forced-auth ge.2.2
    set eapol auth-mode forced-auth ge.2.3
    set eapol auth-mode forced-auth ge.2.4
    set eapol auth-mode forced-auth ge.2.5
    set eapol auth-mode forced-auth ge.2.6
    set eapol auth-mode forced-auth ge.2.10
    set eapol auth-mode forced-auth ge.2.45
    set eapol auth-mode forced-auth ge.2.46
    set eapol auth-mode forced-auth ge.2.47
    set eapol auth-mode forced-auth ge.2.48
    set eapol auth-mode forced-auth ge.3.45
    set eapol auth-mode forced-auth ge.3.46
    set eapol auth-mode forced-auth ge.3.47
    set eapol auth-mode forced-auth ge.3.48
    set eapol auth-mode forced-auth ge.4.9
    set eapol auth-mode forced-auth ge.4.45
    set eapol auth-mode forced-auth ge.4.46
    set eapol auth-mode forced-auth ge.4.47
    set eapol auth-mode forced-auth ge.4.48
    !

    #flowcontrol
    set flowcontrol disable
    !

    #garp
    !

    #gvrp
    set gvrp disable
    !

    #history
    !

    #igmp
    !

    #inlinepower
    !

    #ipsec
    !

    #ipv6
    !

    #lacp
    set lacp aadminkey lag.0.1 1
    set lacp aadminkey lag.0.2 2
    set lacp aadminkey lag.0.3 3
    set lacp aadminkey lag.0.4 4
    set lacp aadminkey lag.0.5 5
    set lacp aadminkey lag.0.6 6
    set lacp singleportlag enable
    !

    #length
    !

    #lldp
    set lldp port status rx-enabled ge.1.3
    set lldp port status rx-enabled ge.1.4
    set lldp port status rx-enabled ge.1.5
    set lldp port status rx-enabled ge.1.6
    set lldp port status disabled ge.1.7
    set lldp port status disabled ge.1.8
    set lldp port status disabled ge.1.9
    set lldp port status disabled ge.1.10
    set lldp port status disabled ge.1.11
    set lldp port status disabled ge.1.12
    set lldp port status disabled ge.1.13
    set lldp port status disabled ge.1.14
    set lldp port status disabled ge.1.15
    set lldp port status disabled ge.1.16
    set lldp port status disabled ge.1.17
    set lldp port status disabled ge.1.18
    set lldp port status disabled ge.1.19
    set lldp port status disabled ge.1.20
    set lldp port status disabled ge.1.21
    set lldp port status disabled ge.1.22
    set lldp port status disabled ge.1.23
    set lldp port status disabled ge.1.24
    set lldp port status disabled ge.1.25
    set lldp port status disabled ge.1.26
    set lldp port status disabled ge.1.27
    set lldp port status disabled ge.1.28
    set lldp port status disabled ge.1.29
    set lldp port status disabled ge.1.30
    set lldp port status disabled ge.1.31
    set lldp port status disabled ge.1.32
    set lldp port status disabled ge.1.33
    set lldp port status disabled ge.1.34
    set lldp port status disabled ge.1.35
    set lldp port status disabled ge.1.36
    set lldp port status disabled ge.1.37
    set lldp port status disabled ge.1.38
    set lldp port status disabled ge.1.39
    set lldp port status disabled ge.1.40
    set lldp port status disabled ge.1.41
    set lldp port status disabled ge.1.42
    set lldp port status disabled ge.1.43
    set lldp port status disabled ge.1.44
    set lldp port status rx-enabled ge.2.3
    set lldp port status rx-enabled ge.2.4
    set lldp port status rx-enabled ge.2.5
    set lldp port status rx-enabled ge.2.6
    set lldp port status disabled ge.2.7
    set lldp port status disabled ge.2.8
    set lldp port status disabled ge.2.9
    set lldp port status disabled ge.2.10
    set lldp port status disabled ge.2.11
    set lldp port status disabled ge.2.12
    set lldp port status disabled ge.2.13
    set lldp port status disabled ge.2.14
    set lldp port status disabled ge.2.15
    set lldp port status disabled ge.2.16
    set lldp port status disabled ge.2.17
    set lldp port status disabled ge.2.18
    set lldp port status disabled ge.2.19
    set lldp port status disabled ge.2.20
    set lldp port status disabled ge.2.21
    set lldp port status disabled ge.2.22
    set lldp port status disabled ge.2.23
    set lldp port status disabled ge.2.24
    set lldp port status disabled ge.2.25
    set lldp port status disabled ge.2.26
    set lldp port status disabled ge.2.27
    set lldp port status disabled ge.2.28
    set lldp port status disabled ge.2.29
    set lldp port status disabled ge.2.30
    set lldp port status disabled ge.2.31
    set lldp port status disabled ge.2.32
    set lldp port status disabled ge.2.33
    set lldp port status disabled ge.2.34
    set lldp port status disabled ge.2.35
    set lldp port status disabled ge.2.36
    set lldp port status disabled ge.2.37
    set lldp port status disabled ge.2.38
    set lldp port status disabled ge.2.39
    set lldp port status disabled ge.2.40
    set lldp port status disabled ge.2.41
    set lldp port status disabled ge.2.42
    set lldp port status disabled ge.2.43
    set lldp port status disabled ge.2.44
    set lldp port status disabled ge.3.1
    set lldp port status disabled ge.3.2
    set lldp port status disabled ge.3.3
    set lldp port status disabled ge.3.4
    set lldp port status disabled ge.3.5
    set lldp port status disabled ge.3.6
    set lldp port status disabled ge.3.7
    set lldp port status disabled ge.3.8
    set lldp port status disabled ge.3.9
    set lldp port status disabled ge.3.10
    set lldp port status disabled ge.3.11
    set lldp port status disabled ge.3.12
    set lldp port status disabled ge.3.13
    set lldp port status disabled ge.3.14
    set lldp port status disabled ge.3.15
    set lldp port status disabled ge.3.16
    set lldp port status disabled ge.3.17
    set lldp port status disabled ge.3.18
    set lldp port status disabled ge.3.19
    set lldp port status disabled ge.3.20
    set lldp port status disabled ge.3.21
    set lldp port status disabled ge.3.22
    set lldp port status disabled ge.3.23
    set lldp port status disabled ge.3.24
    set lldp port status disabled ge.3.25
    set lldp port status disabled ge.3.26
    set lldp port status disabled ge.3.27
    set lldp port status disabled ge.3.28
    set lldp port status disabled ge.3.29
    set lldp port status disabled ge.3.30
    set lldp port status disabled ge.3.31
    set lldp port status disabled ge.3.32
    set lldp port status disabled ge.3.33
    set lldp port status disabled ge.3.34
    set lldp port status disabled ge.3.35
    set lldp port status disabled ge.3.36
    set lldp port status disabled ge.3.37
    set lldp port status disabled ge.3.38
    set lldp port status disabled ge.3.39
    set lldp port status disabled ge.3.40
    set lldp port status disabled ge.3.41
    set lldp port status disabled ge.3.42
    set lldp port status disabled ge.3.43
    set lldp port status disabled ge.3.44
    set lldp port status disabled ge.4.1
    set lldp port status disabled ge.4.2
    set lldp port status disabled ge.4.3
    set lldp port status disabled ge.4.4
    set lldp port status disabled ge.4.5
    set lldp port status disabled ge.4.6
    set lldp port status disabled ge.4.7
    set lldp port status disabled ge.4.8
    set lldp port status disabled ge.4.9
    set lldp port status disabled ge.4.10
    set lldp port status disabled ge.4.11
    set lldp port status disabled ge.4.12
    set lldp port status disabled ge.4.13
    set lldp port status disabled ge.4.14
    set lldp port status disabled ge.4.15
    set lldp port status disabled ge.4.16
    set lldp port status disabled ge.4.17
    set lldp port status disabled ge.4.18
    set lldp port status disabled ge.4.19
    set lldp port status disabled ge.4.20
    set lldp port status disabled ge.4.21
    set lldp port status disabled ge.4.22
    set lldp port status disabled ge.4.23
    set lldp port status disabled ge.4.24
    set lldp port status disabled ge.4.25
    set lldp port status disabled ge.4.26
    set lldp port status disabled ge.4.27
    set lldp port status disabled ge.4.28
    set lldp port status disabled ge.4.29
    set lldp port status disabled ge.4.30
    set lldp port status disabled ge.4.31
    set lldp port status disabled ge.4.32
    set lldp port status disabled ge.4.33
    set lldp port status disabled ge.4.34
    set lldp port status disabled ge.4.35
    set lldp port status disabled ge.4.36
    set lldp port status disabled ge.4.37
    set lldp port status disabled ge.4.38
    set lldp port status disabled ge.4.39
    set lldp port status disabled ge.4.40
    set lldp port status disabled ge.4.41
    set lldp port status disabled ge.4.42
    set lldp port status disabled ge.4.43
    set lldp port status disabled ge.4.44
    set lldp port tx-tlv sys-name mgmt-addr ge.1.1
    set lldp port tx-tlv sys-name mgmt-addr ge.1.2
    set lldp port tx-tlv sys-name mgmt-addr ge.1.45
    set lldp port tx-tlv sys-name mgmt-addr ge.1.46
    set lldp port tx-tlv sys-name mgmt-addr ge.1.47
    set lldp port tx-tlv sys-name mgmt-addr ge.1.48
    set lldp port tx-tlv sys-name mgmt-addr ge.2.1
    set lldp port tx-tlv sys-name mgmt-addr ge.2.2
    set lldp port tx-tlv sys-name mgmt-addr ge.2.45
    set lldp port tx-tlv sys-name mgmt-addr ge.2.46
    set lldp port tx-tlv sys-name mgmt-addr ge.2.47
    set lldp port tx-tlv sys-name mgmt-addr ge.2.48
    set lldp port tx-tlv sys-name mgmt-addr ge.3.45
    set lldp port tx-tlv sys-name mgmt-addr ge.3.46
    set lldp port tx-tlv sys-name mgmt-addr ge.3.47
    set lldp port tx-tlv sys-name mgmt-addr ge.3.48
    set lldp port tx-tlv sys-name mgmt-addr ge.4.45
    set lldp port tx-tlv sys-name mgmt-addr ge.4.46
    set lldp port tx-tlv sys-name mgmt-addr ge.4.47
    set lldp port tx-tlv sys-name mgmt-addr ge.4.48
    !

    #linkflap
    !

    #logging
    set logging default severity 6
    set logging local console disable file enable sfile disable
    set logging server 1 ip-addr 10.0.18.89 descr 'netsight' state enable
    !

    #logout
    set logout 60
    !

    #mac
    !

    #macauthentication
    set macauthentication enable
    set macauthentication password ZfjW4y95XFjfmDm39yxs
    set macauthentication port enable ge.1.5
    set macauthentication port enable ge.1.8
    set macauthentication port enable ge.1.9
    set macauthentication port enable ge.1.11
    set macauthentication port enable ge.1.12
    set macauthentication port enable ge.1.13
    set macauthentication port enable ge.1.14
    set macauthentication port enable ge.1.15
    set macauthentication port enable ge.1.16
    set macauthentication port enable ge.1.17
    set macauthentication port enable ge.1.18
    set macauthentication port enable ge.1.19
    set macauthentication port enable ge.1.20
    set macauthentication port enable ge.1.21
    set macauthentication port enable ge.1.22
    set macauthentication port enable ge.1.23
    set macauthentication port enable ge.1.24
    set macauthentication port enable ge.1.25
    set macauthentication port enable ge.1.26
    set macauthentication port enable ge.1.27
    set macauthentication port enable ge.1.28
    set macauthentication port enable ge.1.29
    set macauthentication port enable ge.1.30
    set macauthentication port enable ge.1.31
    set macauthentication port enable ge.1.32
    set macauthentication port enable ge.1.33
    set macauthentication port enable ge.1.34
    set macauthentication port enable ge.1.35
    set macauthentication port enable ge.1.36
    set macauthentication port enable ge.1.37
    set macauthentication port enable ge.1.38
    set macauthentication port enable ge.1.39
    set macauthentication port enable ge.1.40
    set macauthentication port enable ge.1.41
    set macauthentication port enable ge.1.42
    set macauthentication port enable ge.1.43
    set macauthentication port enable ge.1.44
    set macauthentication port enable ge.2.7
    set macauthentication port enable ge.2.8
    set macauthentication port enable ge.2.9
    set macauthentication port enable ge.2.11
    set macauthentication port enable ge.2.12
    set macauthentication port enable ge.2.13
    set macauthentication port enable ge.2.14
    set macauthentication port enable ge.2.15
    set macauthentication port enable ge.2.16
    set macauthentication port enable ge.2.17
    set macauthentication port enable ge.2.18
    set macauthentication port enable ge.2.19
    set macauthentication port enable ge.2.20
    set macauthentication port enable ge.2.21
    set macauthentication port enable ge.2.22
    set macauthentication port enable ge.2.23
    set macauthentication port enable ge.2.24
    set macauthentication port enable ge.2.25
    set macauthentication port enable ge.2.26
    set macauthentication port enable ge.2.27
    set macauthentication port enable ge.2.28
    set macauthentication port enable ge.2.29
    set macauthentication port enable ge.2.30
    set macauthentication port enable ge.2.31
    set macauthentication port enable ge.2.32
    set macauthentication port enable ge.2.33
    set macauthentication port enable ge.2.34
    set macauthentication port enable ge.2.35
    set macauthentication port enable ge.2.36
    set macauthentication port enable ge.2.37
    set macauthentication port enable ge.2.38
    set macauthentication port enable ge.2.39
    set macauthentication port enable ge.2.40
    set macauthentication port enable ge.2.41
    set macauthentication port enable ge.2.42
    set macauthentication port enable ge.2.43
    set macauthentication port enable ge.2.44
    set macauthentication port enable ge.3.1
    set macauthentication port enable ge.3.2
    set macauthentication port enable ge.3.3
    set macauthentication port enable ge.3.4
    set macauthentication port enable ge.3.5
    set macauthentication port enable ge.3.6
    set macauthentication port enable ge.3.7
    set macauthentication port enable ge.3.8
    set macauthentication port enable ge.3.9
    set macauthentication port enable ge.3.10
    set macauthentication port enable ge.3.11
    set macauthentication port enable ge.3.12
    set macauthentication port enable ge.3.13
    set macauthentication port enable ge.3.14
    set macauthentication port enable ge.3.15
    set macauthentication port enable ge.3.16
    set macauthentication port enable ge.3.17
    set macauthentication port enable ge.3.18
    set macauthentication port enable ge.3.19
    set macauthentication port enable ge.3.20
    set macauthentication port enable ge.3.21
    set macauthentication port enable ge.3.22
    set macauthentication port enable ge.3.23
    set macauthentication port enable ge.3.24
    set macauthentication port enable ge.3.25
    set macauthentication port enable ge.3.26
    set macauthentication port enable ge.3.27
    set macauthentication port enable ge.3.28
    set macauthentication port enable ge.3.29
    set macauthentication port enable ge.3.30
    set macauthentication port enable ge.3.31
    set macauthentication port enable ge.3.32
    set macauthentication port enable ge.3.33
    set macauthentication port enable ge.3.34
    set macauthentication port enable ge.3.35
    set macauthentication port enable ge.3.36
    set macauthentication port enable ge.3.37
    set macauthentication port enable ge.3.38
    set macauthentication port enable ge.3.39
    set macauthentication port enable ge.3.40
    set macauthentication port enable ge.3.41
    set macauthentication port enable ge.3.42
    set macauthentication port enable ge.3.43
    set macauthentication port enable ge.3.44
    set macauthentication port enable ge.4.1
    set macauthentication port enable ge.4.2
    set macauthentication port enable ge.4.3
    set macauthentication port enable ge.4.4
    set macauthentication port enable ge.4.5
    set macauthentication port enable ge.4.6
    set macauthentication port enable ge.4.7
    set macauthentication port enable ge.4.8
    set macauthentication port enable ge.4.10
    set macauthentication port enable ge.4.11
    set macauthentication port enable ge.4.12
    set macauthentication port enable ge.4.13
    set macauthentication port enable ge.4.14
    set macauthentication port enable ge.4.15
    set macauthentication port enable ge.4.16
    set macauthentication port enable ge.4.17
    set macauthentication port enable ge.4.18
    set macauthentication port enable ge.4.19
    set macauthentication port enable ge.4.20
    set macauthentication port enable ge.4.21
    set macauthentication port enable ge.4.22
    set macauthentication port enable ge.4.23
    set macauthentication port enable ge.4.24
    set macauthentication port enable ge.4.25
    set macauthentication port enable ge.4.26
    set macauthentication port enable ge.4.27
    set macauthentication port enable ge.4.28
    set macauthentication port enable ge.4.29
    set macauthentication port enable ge.4.30
    set macauthentication port enable ge.4.31
    set macauthentication port enable ge.4.32
    set macauthentication port enable ge.4.33
    set macauthentication port enable ge.4.34
    set macauthentication port enable ge.4.35
    set macauthentication port enable ge.4.36
    set macauthentication port enable ge.4.37
    set macauthentication port enable ge.4.38
    set macauthentication port enable ge.4.39
    set macauthentication port enable ge.4.40
    set macauthentication port enable ge.4.41
    set macauthentication port enable ge.4.42
    set macauthentication port enable ge.4.43
    set macauthentication port enable ge.4.44
    !

    #maclock
    !

    #mgmt-auth-notify
    !

    #mld
    !

    #mtu
    !

    #multiauth
    set multiauth port mode force-auth ge.1.1
    set multiauth port mode force-auth ge.1.2
    set multiauth port mode force-auth ge.1.3
    set multiauth port mode force-auth ge.1.4
    set multiauth port mode force-auth ge.1.6
    set multiauth port mode force-auth ge.1.7
    set multiauth port mode force-auth ge.1.10
    set multiauth port mode force-auth ge.1.45
    set multiauth port mode force-auth ge.1.46
    set multiauth port mode force-auth ge.1.47
    set multiauth port mode force-auth ge.1.48
    set multiauth port mode force-auth ge.2.1
    set multiauth port mode force-auth ge.2.2
    set multiauth port mode force-auth ge.2.3
    set multiauth port mode force-auth ge.2.4
    set multiauth port mode force-auth ge.2.5
    set multiauth port mode force-auth ge.2.6
    set multiauth port mode auth-reqd ge.2.7
    set multiauth port mode auth-reqd ge.2.8
    set multiauth port mode auth-reqd ge.2.9
    set multiauth port mode force-auth ge.2.10
    set multiauth port mode auth-reqd ge.2.11
    set multiauth port mode auth-reqd ge.2.12
    set multiauth port mode auth-reqd ge.2.13
    set multiauth port mode auth-reqd ge.2.14
    set multiauth port mode auth-reqd ge.2.15
    set multiauth port mode auth-reqd ge.2.16
    set multiauth port mode auth-reqd ge.2.17
    set multiauth port mode auth-reqd ge.2.18
    set multiauth port mode auth-reqd ge.2.19
    set multiauth port mode auth-reqd ge.2.20
    set multiauth po


  • 2.  RE: How to migrate the configuration code from entrasys to EXOS?

    Posted 09-28-2018 09:33
    S,

    This is a difficult question to just answer. You can certainly work with a partner to assist in converting the configuration.

    Working with a partner, and/or taking a training class or two would be helpful for you.

    Also, a quick check of the GTAC Knowledgebase revealed this:

    https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-There-a-Way-to-Convert-an-EOS-Configuratio...

    Thanks,

    Bill



  • 3.  RE: How to migrate the configuration code from entrasys to EXOS?