ExtremeSwitching (EXOS)

Expand all | Collapse all

X460-G2 - Default Bootloader is Corrupt

  • 1.  X460-G2 - Default Bootloader is Corrupt

    Posted 10-24-2017 19:52

    Hello,

    I have an x460-G2 switch that has the following error:

    Copyright 2014 Extreme Networks, Inc. Starting CRC of Default image sendcmd: 0x000000110000109B bad status or crc Read failed ******************************************* **** WARNING! *** **** Default Bootloader is Corrupt: *** **** Please Reinstall *** ******************************************* sendcmd: 0x0000001100000010 bad status or crc Read failed No valid bootloader found. [/code]I try to enter the Bootstrap to reinstall[1] but without success. There is no reponses to spacebar.

    I used these softwares:

    Linux/cu
    Linux/gtkterm
    Linux/Putty
    Windows/Putty

    [1] https://extremeportal.force.com/ExtrArticleDetail?an=000064906



  • 2.  RE: X460-G2 - Default Bootloader is Corrupt

    Posted 10-24-2017 22:03

    Hello Josivan,
    If you are unable enter the Bootstrap/Boot Rom menu or cannot recover the switch, please open the case to our GTAC.

    How To Create a Case Through Extreme Support Portal
    https://extremeportal.force.com/ExtrArticleDetail?an=000080884

    Maybe you need to do RMA for this G2 product.

    Best regards,
    Bin



  • 3.  RE: X460-G2 - Default Bootloader is Corrupt

    Posted 10-25-2017 04:53

    Maybe this article could help in getting to the bootrom, you need to constantly press the spacebar until you see the bootrom prompt, and with new windows you might get the same issue as with below apple where the key repeat is not qiuck enough ?
    https://extremeportal.force.com/ExtrArticleDetail?an=000083344