ExtremeSwitching (EXOS)

  • 1.  enable ssh without reboot

    Posted 01-07-2014 21:55
    Create Date: Aug 26 2012 8:18PM

    Hi All,

    I've just upgraded our new switches to 15.1.3 and did not install the ssh mod before reboot.

    It's now installed, is there a way to refresh the cli so we can start sshd or is it a full reboot so it sees the xmod installed?

    (from luke_iggleden)


  • 2.  RE: enable ssh without reboot

    Posted 01-07-2014 21:55
    Create Date: Aug 27 2012 2:57AM

    Hi,

    try:
    start process "exsshd"

    --
    Jarek (from Jaroslaw_Kasjaniuk)


  • 3.  RE: enable ssh without reboot

    Posted 01-07-2014 21:55
    Create Date: Aug 27 2012 4:07PM

    Well, no idea about the effect of restarting the process recommended by above user.

    If you pay attention to the cli once you install the SSH image - it will tell you that you need to restart "thttpd" and "snmpMaster"

    (from Eugen_NAIMAN)


  • 4.  RE: enable ssh without reboot

    Posted 01-07-2014 21:55
    Create Date: Aug 27 2012 5:30PM

    Slot-1 STACK.1 # run update
    Slot-1 STACK.2 # sh proc exss
    Card Process Name Version Restart State Start Time
    ------------------------------------------------------------------------------
    Slot-1 exsshd 4.1.2.0 0 Ready Tue Aug 28 10:27:02 2012
    Slot-2 exsshd 4.1.2.0 0 Ready Tue Aug 28 10:27:00 2012

    Run update loaded the module, then enable ssh2 as per usual.

    Thanks Guys. (from luke_iggleden)