ExtremeSwitching (EXOS)

Expand all | Collapse all

how to see perticular port mac in X450a-48tdc, not what are the MAC received.

  • 1.  how to see perticular port mac in X450a-48tdc, not what are the MAC received.

    Posted 08-01-2018 04:14
    I want to see MAC address of particular a specific Port (e.g. port no. 35)
    Note:- Not what are the MAC received on that port (sh fdb )

    Is there any procedure to check that or System mac is the only one ?



  • 2.  RE: how to see perticular port mac in X450a-48tdc, not what are the MAC received.

    Posted 08-01-2018 04:22
    Hi!

    X460-24p.1 # sh sw
    SysName: X460-24p
    SysLocation:
    SysContact: support@extremenetworks.com, +1 888 257 3000
    System MAC: 00:04:хх:хх:хх:хх

    Thank you!


  • 3.  RE: how to see perticular port mac in X450a-48tdc, not what are the MAC received.

    Posted 08-01-2018 04:34
    In addition to the message from Alexandr;
    In EXOS, the switch has a single MAC address for all ports, the one as shown above.

    The command you showed is used to see the MAC addresses that are learnt on a specific port.