ExtremeSwitching (EXOS)

 View Only
  • 1.  Connect switch to X450-G2 with dynamic VLAN configuration

    Posted 08-22-2018 10:55

    We want to replace a Smart Switch 6000 that has attached a C2G124-48 through port 24. Both switches has VLAN created statically.

    The new switch is a X450-G2 and VLAN are created dynamically using MAC auth and RADIUS. When we connect a PC or other device, a specific VLAN is created and the device assigned to it.

    We want to connect C2G124-48 (port 24) to X450-G2 (port 49) and allow all traffic from first.

    X450-G2 conf

    create vlan net tag 20
    configure net ipaddress aaa.bbb.ccc.ddd
    configure vlan net add ports 51

    configure netlogin dynamic-vlan uplink-ports 51
    configure netlogin dynamic-vlan enable

    create vlan nt_login
    configure netlogin vlan nt_login
    enable netlogin mac
    enable netlogin ports 1:1-1:50 mac

    We have disabled mac auth in port 49 (disable netlogin ports 1:49 mac)

    And to allow C2G124-48 to connect to network we have added port 49 to VLAN net (configure vlan net add ports 1:49 tagged)

    Now we can telnet to C2G124-48 with a PC connected to the same VLAN (net) but if we connect a device to C2G124-48, with a different VLAN, no network connection is stablished.

    If VLANs in X450-G2 are created statically, I know we can add port 49 to those but we discard this conf, for now.

    Thanks in advance.

  • 2.  RE: Connect switch to X450-G2 with dynamic VLAN configuration

    Posted 09-05-2018 11:32

    Dynamic VLANs aren't working in a mixed architecture with old Enterasys and new Extreme devices.

    An approach to solve this is using a VSA (211) to create VLANs with MAC auth for every switch.

    Without Dynamic VLAN is necessary to create static VLAN and assign trunk ports.