ExtremeSwitching (EXOS)

Expand all | Collapse all

How to disable a port in sharing

  • 1.  How to disable a port in sharing

    Posted 10-06-2016 12:44
    Hi All

    How can I remove a particular port once it is configured as sharing?

    Suppose the following is the command saved in switch.

    “enable sharing 1:24 grouping 1:24,3:24,6:24 algorithm address-based L2 lacp”



    Now I need to remove 6:24 from the following command. Is it possible if so I kindly request somebody to suggest me the command for the same.


  • 2.  RE: How to disable a port in sharing

    Posted 10-06-2016 12:47
    Hi Abdul, please use the command below:

    configure sharing 1:24 delete ports 6:24


  • 3.  RE: How to disable a port in sharing

    Posted 10-06-2016 12:49
    Hi Abdul,

    The command would be

    configure sharing 1:24 delete port 6:24 [/code]Thanks
    Brad


  • 4.  RE: How to disable a port in sharing

    Posted 10-06-2016 13:22
    Dear Parker

    Thank you very much for your quick support. It was realy helpul.

    Thanks & Regards
    Abdul Raheem


  • 5.  RE: How to disable a port in sharing

    Posted 03-17-2021 11:19

     

     



  • 6.  RE: How to disable a port in sharing

    Posted 03-17-2021 11:21

     Can we use below CLI to remove port 2:22 ,2:23 from live sharing port 1:42 . what could be the impact?

    Current config : 
    enable sharing 1:42 grouping 1:42-43, 2:19-23 algorithm address-based L3_L4 lacp
     
    1:42   1:42        LACP      L3_L4       1:42       Y      A        0
                                   L3_L4       1:43       Y      A        0
                                   L3_L4       2:19       Y      A        0
                                   L3_L4       2:20       Y      A        0
                                   L3_L4       2:21       Y      A        0
                                   L3_L4       2:22       Y      A        0
                                   L3_L4       2:23       Y      A        0
     

    CLI using to remove port:
    disable sharing 1:42
    enable sharing 1:42 grouping 2:19-21 algorithm address-based L3_L4 lacp
    disable port 2:22-23

    BR//
    Rakesh Asthana



  • 7.  RE: How to disable a port in sharing

    Posted 03-17-2021 19:15

    Hello,

    If you use disable sharing 1:42 the port config get lost  in addition if the switch on the other sites is running you can create a loop in some situations. Therefore disable ALL ports in the sharing first.

    The better way is to remove single ports with


    configure sharing 1:42 delete port 2:22,2:23

     

     



  • 8.  RE: How to disable a port in sharing

    Posted 10-06-2016 12:47


  • 9.  RE: How to disable a port in sharing

    Posted 10-06-2016 12:47
    Dear Henrique

    Thank you very much for your quick support. It was realy helpul.

    Thanks & Regards
    Abdul Raheem