ExtremeSwitching (EXOS)

Expand all | Collapse all

Will 10G SFP+ (model 10301) work in a x440-G2-24p-10GE4? Getting error when inserting.

  • 1.  Will 10G SFP+ (model 10301) work in a x440-G2-24p-10GE4? Getting error when inserting.

    Posted 01-26-2018 14:02
    Hello and sorry for asking a possibly stupid question, quite new to Extreme switches.

    We have a few new x440-G2-24p-10GE4's and 10G SFP+'s (model 10301). When I insert them into the switch I get the error below. I read reference to needing a license but each post referenced the 24t model, we have the 24p (not sure if that makes a difference). The SFP's will be used for uplink.



  • 2.  RE: Will 10G SFP+ (model 10301) work in a x440-G2-24p-10GE4? Getting error when inserting.

    Posted 01-26-2018 14:10
    Port 24 on the X440-G2-24p is a 1G combo port.

    The 10G capable ports on this switch are port 25-28, located on the back of the switch. You will need a 10G port speed license to allow 10G operation on these ports.


  • 3.  RE: Will 10G SFP+ (model 10301) work in a x440-G2-24p-10GE4? Getting error when inserting.



  • 4.  RE: Will 10G SFP+ (model 10301) work in a x440-G2-24p-10GE4? Getting error when inserting.

    Posted 01-26-2018 14:57
    Check this link https://gtacknowledge.extremenetworks.com/pkb_mobile#/articles/en_US/Q_A/How-Do-I-utilize-the-10G-ports-on-a-X440-G2


  • 5.  RE: Will 10G SFP+ (model 10301) work in a x440-G2-24p-10GE4? Getting error when inserting.

    Posted 01-26-2018 15:00
    Perfect, thank you both! Exactly the info I needed, just a little embarrassed that I didn't find them in my searching.


  • 6.  RE: Will 10G SFP+ (model 10301) work in a x440-G2-24p-10GE4? Getting error when inserting.

    Posted 01-26-2018 14:10
    Also, I wanted to add that the optic you have will work in the rear 10G ports.