ExtremeSwitching (EXOS)

  • 1.  Black Diamond 8810 Fan Operational MIB?

    Posted 11-10-2015 22:40
    I'm setting up our monitoring system (nagios) and trying to set up checks for the fans on our extreme 8810s.

    I've browsed through the mib file for the XOS I'm running (15.6.x.x) and the MIB should be:
    .1.3.6.1.4.1.1916.1.1.1.9.1.2 (this is an index off of extremeFanNumber, this is the direct mib for fan 1)
    root@noc:~# snmpget -v2c -c localread 172.16.0.4 .1.3.6.1.4.1.1916.1.1.1.9.1.2 iso.3.6.1.4.1.1916.1.1.1.9.1.2 = No Such Instance currently exists at this OID[/code]I've also tried:
    iso.3.6.1.4.1.1916.1.32.1.9.1.2 (32 is working for finding CPU, see below)[/code]iso.3.6.1.4.1.1916.1.68.1.9.1.2 (should be the hardware identifier for the bd8810 chassis)[/code]
    Is there something I'm missing in my configuration? This is all I have under snmpMaster:
    configure snmpv3 add community "localread" name "localread" user "v1v2c_ro"[/code]
    I can query other extreme OIDs like for CPU utilization of MSMA and MSMB:
    root@noc:/usr/local/nagios/etc/objects/switches# snmpget -v2c -c localread 172.16.0.4 1.3.6.1.4.1.1916.1.32.1.4.1.9.11 iso.3.6.1.4.1.1916.1.32.1.4.1.9.11 = STRING: "2.2"
    root@noc:/usr/local/nagios/etc/objects/switches# snmpget -v2c -c localread 172.16.0.4 1.3.6.1.4.1.1916.1.32.1.4.1.9.12
    iso.3.6.1.4.1.1916.1.32.1.4.1.9.12 = STRING: "1.2"[/code]



  • 2.  RE: Black Diamond 8810 Fan Operational MIB?

    Posted 11-10-2015 23:51
    Ron,

    The following OIDs should work. I was able to test on 16.1 and 15.6 on a BD8810.

    extremeFanOperational
    .1.3.6.1.4.1.1916.1.1.1.9.1.2

    extremeFanNumber
    .1.3.6.1.4.1.1916.1.1.1.9.1.1

    extremeFanSpeed
    .1.3.6.1.4.1.1916.1.1.1.9.1.4

    Also, please assure that the correct MIB file is loaded in the MIB browser or NMS.





  • 3.  RE: Black Diamond 8810 Fan Operational MIB?

    Posted 11-11-2015 14:30
    I definitely have the MIB file loaded, both in my MIB browser and in SNMP on my monitoring system, but I still cannot pull any of those MIBs from my 8810 chassis.


    root@noc:~# snmpget -v2c -c localread 172.16.0.4 .1.3.6.1.4.1.1916.1.1.1.9.1.2
    EXTREME-SYSTEM-MIB::extremeFanOperational = No Such Instance currently exists at this OID
    root@noc:~# snmpget -v2c -c localread 172.16.0.4 .1.3.6.1.4.1.1916.1.1.1.9.1.1
    EXTREME-SYSTEM-MIB::extremeFanNumber = No Such Instance currently exists at this OID
    root@noc:~# snmpget -v2c -c localread 172.16.0.4 .1.3.6.1.4.1.1916.1.1.1.9.1.4
    EXTREME-SYSTEM-MIB::extremeFanSpeed = No Such Instance currently exists at this OID[/code]
    I have working fans:
    Warp1.3 # sh fans
    FanTray information:
    State: Operational
    NumFan: 9
    PartInfo: 1412G-00301 450305-00-04
    Revision: 4.0
    Odometer: 335 days 2 hours since Dec-10-2014
    Upper-Left Fan-1: Operational at 3000 RPM
    Middle-Left Fan-2: Operational at 3000 RPM
    Lower-Left Fan-3: Operational at 2940 RPM
    Upper-Center Fan-4: Operational at 2940 RPM
    Center Fan-5: Operational at 3000 RPM
    Lower-Center Fan-6: Operational at 2940 RPM
    Upper-Right Fan-7: Operational at 2940 RPM
    Middle-Right Fan-8: Operational at 2940 RPM
    Lower-Right Fan-9: Operational at 2880 RPM[/code]
    I did notice that we're running 15.7.1.4, but those MIBs shouldn't have changed, they're the same in version 16.x.x.x

    Should I open a ticket for this?



  • 4.  RE: Black Diamond 8810 Fan Operational MIB?

    Posted 11-11-2015 14:30
    Hi Ron,
    It looks like the detail you're missing is the last key of the OID - the actual fan number.
    In your switch, there are 9 fans. If you iterate through each of them, you should get the expected results. It's fan number+100 (i.e. fan 1 = .101, fan 2 = .102).
    drew@bigbird:~$ snmpget -v2c -c public 10.67.72.65 .1.3.6.1.4.1.1916.1.1.1.9.1.2.101
    iso.3.6.1.4.1.1916.1.1.1.9.1.2.101 = INTEGER: 1
    drew@bigbird:~$ snmpget -v2c -c public 10.67.72.65 .1.3.6.1.4.1.1916.1.1.1.9.1.4.101
    iso.3.6.1.4.1.1916.1.1.1.9.1.4.101 = INTEGER: 2940
    drew@bigbird:~$ snmpget -v2c -c public 10.67.72.65 .1.3.6.1.4.1.1916.1.1.1.9.1.4.102
    iso.3.6.1.4.1.1916.1.1.1.9.1.4.102 = INTEGER: 2880
    drew@bigbird:~$ snmpget -v2c -c public 10.67.72.65 .1.3.6.1.4.1.1916.1.1.1.9.1.4.103
    iso.3.6.1.4.1.1916.1.1.1.9.1.4.103 = INTEGER: 3000[/code]Let me know if that does the trick.

    -Drew


  • 5.  RE: Black Diamond 8810 Fan Operational MIB?

    Posted 11-11-2015 14:30
    Drew, that was it, thanks! Can't believe I missed something so simple!


  • 6.  RE: Black Diamond 8810 Fan Operational MIB?

    Posted 11-11-2015 14:30
    No problem. Glad to help!