ExtremeSwitching (EXOS)

  • 1.  X670v with 10/100/1000 baseT sfp. Port is not active.

    Posted 07-02-2014 13:38
    Port 6 of the Extreme x670V is connected (CAT 6) to 1G port on a SilMech server through a 10/100/1000 BaseT sfp. The server has link lights but the router does not. The router's port is config to the correct vlan and is enabled and ready. I also tried just connecting the router's port to a fluke. Is there any special configuration needed on the router for this to work?

    Image : ExtremeXOS version 15.1.2.12 v1512b12 by release-manager
    on Fri Apr 20 20:24:20 EDT 2012
    BootROM : 2.0.2.1
    Diagnostics : 5.6

    Any help would be appreciated.


  • 2.  RE: X670v with 10/100/1000 baseT sfp. Port is not active.

    Posted 07-02-2014 13:57
    I belive the minimum software version could be EXOS 15.2.1 for X670V. Please confirm it by clicking below link,

    http://extrcdn.extremenetworks.com/wp-content/uploads/2014/05/ExtremeXOS-Hardware-Software-Compatibi...
    Use Extreme Certified SFP.



  • 3.  RE: X670v with 10/100/1000 baseT sfp. Port is not active.

    Posted 07-02-2014 14:02
    Thanks for your reply. I'll investigate your link.

    SFP 10/1000/1000BASE-T is "Extreme Networks Certified" Part Number: FCLF8522P2BTL-EX

    Thx,

    Ron



  • 4.  RE: X670v with 10/100/1000 baseT sfp. Port is not active.

    Posted 07-02-2014 14:16





  • 5.  RE: X670v with 10/100/1000 baseT sfp. Port is not active.

    Posted 07-02-2014 17:55
    Thx for your help... I upgraded. Its working now.