ExtremeSwitching (EXOS)

  • 1.  core switch configure stp

    Posted 02-26-2017 17:25
    hello
    i have a core swich extreme summit x450 and I would like to know how to configure the spanning tree
    I believe that the priority must be at least What is the correct configuration?

    thank you for your support


  • 2.  RE: core switch configure stp

    Posted 02-26-2017 21:08
    If you are running EXOS 21.x or later, have you seen https://github.com/extremenetworks/EXOS_Apps/tree/master/EZ_SpanningTree



  • 3.  RE: core switch configure stp

    Posted 02-26-2017 21:31
    hi dave
    my version is 15.5.5.2
    The article does not talk about core switch and priority
    Because it seems to me that the configuration of spanning tree is different on a switch core network



  • 4.  RE: core switch configure stp

    Posted 02-26-2017 23:44
    Hi Greg,

    The below link gives you the basic idea of configuring RSTP in summit/BlackDiamond switches,

    https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-RSTP-in-EXOS

    The below link is for the user guide to EXOS and sample configuration is available for your reference.

    https://extrcdn.extremenetworks.com/wp-content/uploads/2014/01/EXOS_Concepts_Guide_15_4.pdf

    As far as the priority goes, lower the numerical value of the priority, higher the precedence.