ExtremeSwitching (EXOS)

  • 1.  Powering up Bosch Autodome 7000 PTZ camera on X440/460 switches

    Posted 01-16-2014 07:49
    Hi, does anyone know how could I power up a bosch autodome 7000 which requires 30W on a X440-24p? I have tried connecting to it but the switch only delivers ~4-5W. Are there any config needed? Thanks


  • 2.  RE: Powering up Bosch Autodome 7000 PTZ camera on X440/460 switches

    Posted 01-20-2014 17:26
    Hi Kim,

    What is the operator-limit configured on the port ? How many POE devices are connected to this switch?

    Please post the output of the below command

    Show inline-power info detail port .

    Thanks.


  • 3.  RE: Powering up Bosch Autodome 7000 PTZ camera on X440/460 switches

    Posted 01-20-2014 21:31
    It was left as default and there is only one POE camera connected to it.


  • 4.  RE: Powering up Bosch Autodome 7000 PTZ camera on X440/460 switches

    Posted 01-21-2014 15:43
    Kim,

    thank you for the question. It appears this particular camera may be on the edge of the maximum power we can deliver on a POE+ port (i.e. 30 Watt).

    We would love to investigate this properly with our TAC team. I suggest that the customer opens an case through their normal support process.

    best regards,

    Mike Lytle