ExtremeSwitching (EXOS)

Expand all | Collapse all

Telnet connection from core switch sub-switch

  • 1.  Telnet connection from core switch sub-switch

    Posted 10-21-2017 12:53
    Hello :)

    I have a extreme core switch (A) where an lwl cable is connected to another switch (B) (uplink port)

    The switch (B) has no ip address yet. I can only access the switch if I connect directly with a notebook via the management port.

    I can access the switch (A) via telnet 192.168.100.1
    Is it possible that I can access switch (B) from switch (A) via telnet?
    If yes, how can I do this?


  • 2.  RE: Telnet connection from core switch sub-switch

    Posted 10-21-2017 13:05
    The switch needs an IP for the telnet connection.

    # configure vlan XXX ipaddress x.x.x.x x.x.x.x


  • 3.  RE: Telnet connection from core switch sub-switch

    Posted 10-21-2017 15:40
    You may create temporary vlan on core switch and connect untagged port of that vlan to mgmt port on switch (B)