ExtremeSwitching (EXOS)

  • 1.  UP Profile for VOIP Detect

    Posted 01-07-2014 21:53
    Create Date: May 1 2012 3:31AM

    HI, i have created a UPM profile to detect the VOIP phones, the script is working, however my logs is getting populated with these messages .

    2012-05-01 11:01:46.24 [i] serial UPM: disable cli-config-logging
    2012-05-01 11:01:46.23 [i] serial UPM: set var EVENT.PROFILE Detect-Alcatel-voip
    2012-05-01 11:01:46.23 [i] serial UPM: set var EVENT.NAME DEVICE-DETECT
    2012-05-01 11:01:46.20 [i] serial UPM: set var EVENT.DEVICE GEN_TEL_PHONE
    2012-05-01 11:01:46.17 [i] serial UPM: set var EVENT.TIME 1335866505
    2012-05-01 11:01:46.15 [i] serial UPM: set var EVENT.USER_PORT 25
    2012-05-01 11:01:46.15 [i] serial UPM: set var EVENT.DEVICE_POWER 0
    2012-05-01 11:01:46.14 [i] serial UPM: set var EVENT.DEVICE_MAC xx:xx:xx:xx:xx:xx

    Is it possible to stop these messages

    PJ

    (from PRASAD_JACOB)


  • 2.  RE: UP Profile for VOIP Detect

    Posted 01-07-2014 21:53
    Create Date: May 1 2012 8:36AM

    PJ,

    You can filter events out of the log in situations like this. For example, the following filter exclude would filter out 802.1x authentications from a custom log filter setup for events sent to EPICenter/Ridgeline.

    configure log filter EPICenter add exclude event AAA.authPass

    This example would filter out client authentication messages from the Default filter.

    configure log filter DefaultFilter add exclude event nl.ClientAuthenticated

    My concern would be that you would filter out other messages of the same type that you would want to see if you targeted "cli.logLocalCmd". I'm not familiar with this exact situation. Help me understand your config. I take it you have CLI logging enabled? I see you're are trying to disable it in your UPM script.

    Regards, Scott (from Scott_Singer)