ExtremeSwitching (EXOS)

  • 1.  Only one MSM is seen in BD 8806

    Posted 12-31-2015 05:39
    in extreme BD 8806, io can see only one MSM, only MSM B is showing master..s there any specific reason


  • 2.  RE: Only one MSM is seen in BD 8806

    Posted 12-31-2015 05:51
    Hi, Neeraj!

    What exactly MSMs do you have?
    What EXOS version?

    Thank you!


  • 3.  RE: Only one MSM is seen in BD 8806

    Posted 12-31-2015 06:23
    MSM-A Empty 0MSM-B MSM-48c
    ExtremeXOS version 15.1.3.4


  • 4.  RE: Only one MSM is seen in BD 8806

    Posted 12-31-2015 06:23
    What MSM is physically installed in A-slot?
    Also MSM-48c?

    Thank you!


  • 5.  RE: Only one MSM is seen in BD 8806

    Posted 12-31-2015 06:23
    its showing empty ..my question is its support both the MSM..or only one at a time ..?


  • 6.  RE: Only one MSM is seen in BD 8806

    Posted 12-31-2015 06:23
    Both.
    2 MSM is main reason for management redundancy.


  • 7.  RE: Only one MSM is seen in BD 8806

    Posted 12-31-2015 06:23
    it will impact services as well if we use only one ..in case of current one failing


  • 8.  RE: Only one MSM is seen in BD 8806

    Posted 12-31-2015 06:23
    Read, please, "BD8000 hardware installation guide" and "EXOS User Guide".
    There is all information about MSMs and failover.

    Thank you!



  • 9.  RE: Only one MSM is seen in BD 8806

    Posted 12-31-2015 06:59
    As AlexandrP said, you can have 2 MSM at the same time in a BD8806. It's recommended to have 2 MSM for obvious redundancy consideration, and also for highest throughput. MSMs are working in a load-sharing mode for their fabric role, meaning each MSM provide half the bandwidth to the chassis. They work as Master/Backup for the Management.


  • 10.  RE: Only one MSM is seen in BD 8806

    Posted 12-31-2015 15:21
    Am I understanding you do have a msm in slot A but is shows empty?? If so then it may be faulty or worse a different model... If you do have one there I would hook a console cable up to it schedule a maintenance window and unseat it for a couple of minutes and reseat it.. watch the boot us process from console session .... if it is empty then you really should have a second one in there as other have said you are not allowing the 8806 to run at top performance. After reading the guide about syncing and dealing with the two msm's shout back if additional questions pop up...