ExtremeSwitching (EXOS)

  • 1.  how to enable gvrp? missing command gvrp

    Posted 04-21-2014 04:09
    Need to configure x440 to listen/create dynamic vlans from core switch (dell)


  • 2.  RE: how to enable gvrp? missing command gvrp

    Posted 11-30-2014 10:56
    Any update of GVRP features? This feature is very helpful on other products.


  • 3.  RE: how to enable gvrp? missing command gvrp

    Posted 11-30-2014 10:56
    i think GVRP is replaced by MVR on EXOS


  • 4.  RE: how to enable gvrp? missing command gvrp

    Posted 01-23-2015 05:46
    Hello Gene,

    GVRP is a GARP application that provides 802.1Q-compliant VLAN pruning and dynamic VLAN creation on 802.1Q trunk ports.With GVRP, the switch can exchange VLAN configuration information with other GVRP switches, prune unnecessary broadcast and unknown unicast traffic, and dynamically create and manage VLANs on switches that are connected through 802.1Q trunk ports.

    In EXOS:You must be in 15.3.2

    Multiple Registration Protocol/Multiple VLAN Registration Protocol is used for dynamically creating

    VLANs and/or dynamically adding ports to VLANs. As per IEEE Std 802.1Q-2011, some VLANs can be

    marked as forbidden VLANs on some ports so that when MVRP PDU is received on the port with the

    particular forbidden VLAN Id, the VLAN is not created and if the VLAN is already there, the port is not

    added to the VLAN.

    The VLAN registration is of three types:

    • Forbidden—Port is forbidden to be added to the VLAN

    • Normal—Port is allowed to be added to the VLAN

    • Fixed—Port is statically added to the VLAN



  • 5.  RE: how to enable gvrp? missing command gvrp

    Posted 01-23-2015 05:46
    Hi Parthiban! thanks for the reply, we decided to replace the dell switch with a new x670v switch, making it easier to use MVR


  • 6.  RE: how to enable gvrp? missing command gvrp

    Posted 04-02-2015 12:20
    Hi Parthiban,

    How about compatibility between GVRP capable switch with MVR on EXOS? Our existing devices are not MVR capable.

    Best regards,


  • 7.  RE: how to enable gvrp? missing command gvrp

    Posted 04-25-2014 04:51
    Gene,

    GVRP is not supported in EXOS.

    Regards

    Ron


  • 8.  RE: how to enable gvrp? missing command gvrp

    Posted 04-25-2014 04:51
    Is GVRP on the road map to be included in EXOS at any point ?
    Regards
    Terry