ExtremeSwitching (EXOS)

Expand all | Collapse all

What is the default management IP of an X460-24t switch?

  • 1.  What is the default management IP of an X460-24t switch?

    Posted 10-19-2018 15:28
    What is the default management IP of an X460-24t switch?


  • 2.  RE: What is the default management IP of an X460-24t switch?

    Posted 10-19-2018 16:15
    Hi Joel,
    There isn't a default IP address on the management VLAN/port. However, depending on the software version, the switch will get an IP address via DHCP and will flash the address in the LED panel used to display stacking slot number.


  • 3.  RE: What is the default management IP of an X460-24t switch?

    Posted 10-19-2018 16:15
    Hi Drew,

    In the past, when ZTP (not ZTP+) was first introduced (16.1 AFAIR), there also was a thing that allowed an EXOS switch to assign an APIPA on his own if no DHCP offer was given, and that IP was in form of 169.254.xx.yy, where the last two octets are the last two octets from the switch's MAC address. Is it still there?

    Kind regards,
    Tomasz


  • 4.  RE: What is the default management IP of an X460-24t switch?

    Posted 10-19-2018 16:15
    On a G1, there's no default IP. With 21.1+, so G2 and newer switches, a default config switch would try DHCP and if it fails, it would have the link layer IPv4 address, based on the MAC: that would be displayed digit by digit on the LED panel for the stacking slot number (as Drew said).


  • 5.  RE: What is the default management IP of an X460-24t switch?

    Posted 10-22-2018 19:06
    Thank you very much for your help guys, I still haven't been able to access the switch, I'm trying to access via console but I haven't been able either.
    For more details I'm using the following configuration in PuTTy

    Speed: 9600
    Data bits: 8
    Stop bits: 1
    Parity: None
    Flow control: XON/XOFF


  • 6.  RE: What is the default management IP of an X460-24t switch?

    Posted 10-22-2018 19:06
    Hi,

    What cables are you using?
    Straight-through or crossover RJ45? Then Extreme RJ45/DB9 adapter + DB9/USB adapter?

    Regards,
    Tomasz


  • 7.  RE: What is the default management IP of an X460-24t switch?

    Posted 10-22-2018 19:06
    I'm using RJ45 crossover. Then Extreme RJ45/DB9 adapter + DB9/USB adapter




  • 8.  RE: What is the default management IP of an X460-24t switch?

    Posted 10-22-2018 19:06
    The cable in the bag is a straight cable. Is that the one you're using?


  • 9.  RE: What is the default management IP of an X460-24t switch?

    Posted 10-22-2018 19:06
    in the image above you share the kit I'm using