ExtremeSwitching (EXOS)

  • 1.  Does anyone know in switch has Displays packet forwarding information

    Posted 01-07-2014 21:56
    Create Date: Sep 28 2012 1:37AM

    Does anyone know if there is a similar functionality in EXOS to Cisco Displays packet forwarding interface...
    In Cisco Nexus it has "sh port-ch load-balance forwarding-path interface port-channel ...." command
    (from Hsu_LiPing)


  • 2.  RE: Does anyone know in switch has Displays packet forwarding information

    Posted 01-07-2014 21:56
    Create Date: Sep 28 2012 7:46PM

    Hello HelpmeI am not familiar with the output of that command but we have a show port sharing to see what ports and algorithm are being used and show port util for packet and % utilization on the ports.Can you pleas provide a sample of the output from that command or specifically what you are looking for.ThanksP (from Paul_Russo)


  • 3.  RE: Does anyone know in switch has Displays packet forwarding information

    Posted 01-07-2014 21:56
    Create Date: Oct 1 2012 12:05AM

    when i use LACP sometimes i want to know which packet through link port, from cisco there has a command can do that
    ex:
    .........# sh port-channel load-balance forwarding-path int port-channel 1 vlan 10 dst-ip a.b.c.d
    Missing params will be substituted by 0's.
    Load-balance Algorithm on switch: source-dest-ip
    crc8_hash: 128 Outgoing port id: Ethernet1/1
    Param(s) used to calculate load-balance:
    dst-ip: a.b.c.d
    src-ip: 0.0.0.0
    dst-mac: 0000.0000.0000
    src-mac: 0000.0000.0000

    this form "dst-ip" there are too many paramteres:
    dst-ip Destination IP Address
    dst-ipv6 Destination IPV6 Address
    dst-mac Destination MAC Address
    l4-dst-port Destination Port
    l4-src-port Source Port
    src-ip Source IP Address
    src-ipv6 Source IPV6 Address
    src-mac Source MAC Address

    so i wish extremenetwork switch will have this command

    (from Hsu_LiPing)


  • 4.  RE: Does anyone know in switch has Displays packet forwarding information

    Posted 01-07-2014 21:56
    Create Date: Oct 1 2012 2:37PM

    Hey HelpmeSorry we currently do not show flow based on the algorithm. I would suggest contacting your local sales team and discussing this as a feature request.I will post it internally to see if it is something we may already be working on.ThanksP (from Paul_Russo)