ExtremeSwitching (EXOS)

Expand all | Collapse all

Stacking cable support for X440-G2 (correction to documentation)

  • 1.  Stacking cable support for X440-G2 (correction to documentation)

    Posted 08-15-2016 16:55
    In the Summit Hardware Installation Guide for EXOS 21, the "Stacking Cables" table is incorrect with respect to stacking-cable support on the X440-G2 switch.
    http://documentation.extremenetworks.com/summit/Summit_Family_HW_Install/Stacking/r_stacking-cables....

    At the bottom of the table, the stated limitation -- 10G stacking ports on ExtremeSwitching X440-G2 (48-port switches only), Summit X450-G2 10G, and ExtremeSwitching X620 switches -- should apply only to the 10 meter cable (model no. 10307). The shorter cable lengths (model nos. 10304, 10305, and 10306) are supported for all models of the X440-G2 as well as for the X450-G2 (10G models) and the X620.

    I'll be sure to correct the table in the next update to the document.

    Larry Kunz
    Information Development
    Extreme Networks


  • 2.  RE: Stacking cable support for X440-G2 (correction to documentation)

    Posted 08-19-2016 10:32
    I informed our team about this issue.


  • 3.  RE: Stacking cable support for X440-G2 (correction to documentation)

    Posted 11-23-2017 15:59
    Hello All,

    what is the reason for this limitation?

    Thanks and regards
    Ángel