ExtremeSwitching (EXOS)

 View Only

  • 1.  OSPF and MPLS route

    Posted 09-12-2018 07:30
    I have created OSPF,MPLS and VPLS in our switch. One of my core swith
    iproute to our remote network. i found one path ospf route to remote netowrk but
    the mpls show have tow path to remote netowk. You can see the below information.
    I really appericate if someone help me to explain.

    CORE_SWITCH.1 # show iproute 192.168.1.1/32
    Ori Destination Gateway Mtr Flags VLAN Duration
    mp 192.168.1.1/32 10.1.12.2 1 U--D---um-L-- CR1-CR2_782 0d:4h:13m:44s
    mp 192.168.1.1/32 100.100.100.2 1 U--D---um-L-- CR1-CR2_902 0d:3h:33m:40s
    #or 192.168.1.1/32 10.1.12.2 12 UG-D---um--f- CR1-CR2_782 0d:4h:13m:45s


  • 2.  RE: OSPF and MPLS route

    Posted 09-12-2018 09:36
    Hi,

    only the OSPF route is installed in the forwarding table (as can be seen from the f flag, that is shown for the OSPF route only).

    Thanks,
    Erik