ExtremeSwitching (EXOS)

Expand all | Collapse all

show vlan statistics not show the tx total and tx Byte X440-48p

  • 1.  show vlan statistics not show the tx total and tx Byte X440-48p

    Posted 09-12-2017 08:55
    the show vlan statistics is not showing the TX frames or Bytes
    have a X440-48p
    Vlan Rx Total Rx Byte Tx Total Tx Byte
    Frames Count Frames Count
    ================================================================================
    Default 313831111 183112494472 - -
    voice 125149 10530642 - -



  • 2.  RE: show vlan statistics not show the tx total and tx Byte X440-48p

    Posted 09-12-2017 10:57
    Hi Jarret,

    According to the Guidelines & limitations section in the EXOS 16.1 User Guide (page 459), Only BlackDiamond X8 and 8900 series modules, and Summit X460, X460G2, X480, X670, X670G2, and X770 switches provide support for both receive and transmit statistics.
    Please let us know if you have any other questions.
    Thank you.

    Best regards,
    Andrew


  • 3.  RE: show vlan statistics not show the tx total and tx Byte X440-48p

    Posted 09-12-2017 10:57
    Ya did try the config port all monitor vlan "voice" tx-only
    no joy, O well thanks for the speedy reply


  • 4.  RE: show vlan statistics not show the tx total and tx Byte X440-48p

    Posted 09-22-2017 00:11
    Hi, This article may help you.

    Show vlan statistics don't show Tx counters
    https://gtacknowledge.extremenetworks.com/articles/Q_A/Show-vlan-statistics-don-t-show-Tx-counters

    Best regards