ExtremeSwitching (EXOS)

Expand all | Collapse all

ip forward-protocol from Enterasys syntax to Extreme

  • 1.  ip forward-protocol from Enterasys syntax to Extreme

    Posted 05-09-2017 08:11
    Hello Guy,

    how to translate these commands from Enterasys to Extreme 460?
    i haven't found the right command and no port on this so far.
    ip forward-protocol udp 2009
    ip forward-protocol udp 3001

    thanks in advance


  • 2.  RE: ip forward-protocol from Enterasys syntax to Extreme

    Posted 05-09-2017 08:22
    my goal is to allow some ports which are not allowed by Default...
    following is already implemented:
    """"
    configure bootprelay add


  • 3.  RE: ip forward-protocol from Enterasys syntax to Extreme

    Posted 05-09-2017 08:51
    UDP profiles should be used for that, assuming it is udp broadcasts to these ports.
    https://gtacknowledge.extremenetworks.com/articles/Solution/UDP-broadcast-packets-are-dropped-by-EXO...



  • 4.  RE: ip forward-protocol from Enterasys syntax to Extreme

    Posted 05-10-2017 07:49
    thanks a lot. issue solved. regards


  • 5.  RE: ip forward-protocol from Enterasys syntax to Extreme

    Posted 05-10-2017 07:51