ExtremeSwitching (EXOS)

  • 1.  Gateway address of the switch

    Posted 02-13-2015 02:28
    Hello,

    Normally on Enterasys Networks we can write,

    set ip address 10.0.0.98 mask 255.255.255.0 gateway 10.0.0.254

    but in new Extreme Networks we can not write that gateway address. Therefore, where should we need to define that gateway address and how ?

    Thanks,
    Best Regards


  • 2.  RE: Gateway address of the switch

    Posted 02-13-2015 03:57
    Erhan,

    To define the gateway address in XOS you need to the following...

    configure iproute add default x.x.x.x


  • 3.  RE: Gateway address of the switch

    Posted 02-13-2015 14:03
    There is no specifi command for gateway in exos You can add a default route as it does the same . Every exos switch works the same way