ExtremeSwitching (EXOS)

 View Only
  • 1.  forward PTPv2 packets X430-8p

    Posted 12-21-2017 08:05
    I'm using X430-8p, and i saw it does not support PTP. So I just want the switch to forward PTP to all port without change. my setup is HUB like configuration. with the following command:
    disable learning forward-packets port all
    all packets i sent are forward except of the PTPv2 packets. what should I do?

  • 2.  RE: forward PTPv2 packets X430-8p

    Posted 12-21-2017 09:41
    Hi Amit,

    If you can match the packet using ACL then "redirect-port-list" can be used as action modifier and can be sent out through intended ports.

    This article has the outline on how to create and configure access lists.

  • 3.  RE: forward PTPv2 packets X430-8p

    Posted 01-02-2018 14:44
    I don't see a reason why the switch wouldn't forward the packets. Is this multicast or unicast PTP? Is there a reason you are disabling learning?

    What software version are you running and what other configuration changes have been made?