ExtremeSwitching (EXOS)

  • 1.  Event Logs information

    Posted 07-20-2014 02:29
    Hi ,

    I would like to know some Event Logs info from X440 Series Switch as below.
    Could you please help me in detail what mean for and how to fix it properly?

    1)


  • 2.  RE: Event Logs information

    Posted 07-20-2014 04:05


  • 3.  RE: Event Logs information

    Posted 07-20-2014 04:05
    Thanks Mr. Sumit Tokle


  • 4.  RE: Event Logs information

    Posted 07-20-2014 11:58
    2) [i]Slot-1:Port 2:24 Link Down This is a basic port trap for a port down such as a PC being powered down 7) [i]Slot-1:Module in Slot-5 is removed This seems like a module was either removed from athe card in slot one and placed back into the chassis or this issue may need to be investigated through an escalation.


  • 5.  RE: Event Logs information

    Posted 07-20-2014 11:58
    Thanks Mr. Jason Parker


  • 6.  RE: Event Logs information

    Posted 07-20-2014 11:58


  • 7.  RE: Event Logs information

    Posted 08-15-2014 06:48
    Hi all,

    If confirmed that the L3 table reached its limitation what could be the worse scenario? Could be total POE shutdown?



  • 8.  RE: Event Logs information

    Posted 08-15-2014 08:08
    Dastan,

    You have a x440, which has a limited L3 Multcast Table. If you are not running L3 multicast protocols, nor MVR, IGMPv3 or PVLAN, you may want to switch to L2 lookup. That way, you will increase dramatically the scalability (~20x). This is the mac-vlan lookup-key.

    If you need MVR, IGMPv3 and/or PVLAN, mixed-mode can be a solution.

    Eventually, you can just configure compression for IPMc, if you need just a bit more of entries.

    You need 15.3.1+ software for the lookup-key commands.

    Please refer to the Multicast EXOS Documentation for the details.