ExtremeSwitching (EXOS)

  • 1.  Version 15.3.5.2-patch1-10 for X460

    Posted 02-06-2017 18:43
    Hello Team,

    I need upgrade switches X150, 250 and 450 to version 15.3.5.2-patch1-10, but I can not find link for download this version, is possible can share me the link.


  • 2.  RE: Version 15.3.5.2-patch1-10 for X460

    Posted 02-06-2017 21:03
    Hi Susana,
    Can you try the steps in this article: Where can I download EXOS images or xmod files?


  • 3.  RE: Version 15.3.5.2-patch1-10 for X460

    Posted 02-07-2017 01:37
    I can see Drew has already provided you the link which you were looking for. Assuming you know how to upgrade these switches. If still need to know other than the tftp mode of transferring the image. Just like upgrading EXOS using SCP or from a USB flash drive or so then can always refer the below article after downloading the required EXOS:

    https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Obtain-and-Upgrade-EXOS/?q=how+to+u...



  • 4.  RE: Version 15.3.5.2-patch1-10 for X460

    Posted 02-07-2017 13:08
    Hello Tripathy,

    I have serial number the switch, but i write this serial and he does not show me the version 15.3.5.2-patch1-10. I want know where find this version.

    Thanks.


  • 5.  RE: Version 15.3.5.2-patch1-10 for X460

    Posted 02-07-2017 13:08
    If you're not seeing that version (or anything newer), it's likely that your switch doesn't have a current/valid support contract.


  • 6.  RE: Version 15.3.5.2-patch1-10 for X460

    Posted 02-07-2017 13:08
    Hello Drew,

    It is possible to request at GTAC this version, Thanks.


  • 7.  RE: Version 15.3.5.2-patch1-10 for X460

    Posted 02-07-2017 13:08
    Hi Susana, GTAC can confirm your contract status if you'd like to go that route. They won't be able to provide the software for free unless the switch is covered.


  • 8.  RE: Version 15.3.5.2-patch1-10 for X460

    Posted 02-07-2017 13:41
    Susana, please also note that there is a v15.3.5.2-patch1-13 available. It would be recommended (and optional) to use the over patch 1 through 10 instead.