ExtremeSwitching (EXOS)

  • 1.  Copy port configuration to another port?

    Posted 12-14-2015 06:24
    Configuration Port ? which command can make same configuration Port same another port previously prepared?


  • 2.  RE: Copy port configuration to another port?

    Posted 12-14-2015 12:17
    I do not believe there is an option to mirror the config from one port to another


  • 3.  RE: Copy port configuration to another port?

    Posted 12-14-2015 15:37
    thank you David,

    but could you please provide me a steps for do that , like I would configure port 3 like port1

    ex: configure ports 1 auto on speed 1000 duplex full , Vlan 1,2,3



  • 4.  RE: Copy port configuration to another port?

    Posted 12-14-2015 15:47
    You would have to look at the port configured the way you want
    Show port X:XX info detail
    Then manually configure all those attributes on the new port.

    The only shortcut I could think of would be:
    sho config | include 1:6
    configure vlan AH-Guest add ports 1:6, 1:12, 1:48, 1:50, 1:52, 2:6 tagged configure vlan AH-MGMT add ports 1:6, 1:12, 1:48, 1:50, 1:52, 2:6 tagged
    configure vlan Data add ports 1:4, 1:6, 1:11-12, 1:21, 1:44, 1:48-50, 1:52, 2:1-3, 2:6 tagged
    configure vlan Voice add ports 1:3-4, 1:6, 1:10, 1:12, 1:15, 1:21, 1:48-50, 1:52, 2:1, 2:3, 2:6, 2:45 tagged
    configure vlan WAN add ports 1:4, 1:6, 1:12, 1:21, 1:48-50, 1:52, 2:1, 2:6 tagged
    configure qosprofile QP5 minbw 0 maxbw 100 ports 1:6
    enable cdp ports 1:6
    configure inline-power detection bypass ports 1:6

    You could then clean that up in a text editor and past it back in with the new port number:
    configure vlan AH-Guest add ports x:xx tagged
    configure vlan AH-MGMT add ports x:xx tagged
    configure vlan Data add ports x:xx tagged
    configure vlan Voice add ports x:xx tagged
    configure vlan WAN add ports x:xx tagged
    configure qosprofile QP5 minbw 0 maxbw 100 ports x:xx
    enable cdp ports x:xx
    configure inline-power detection bypass ports x:xx

    Hope this helps


  • 5.  RE: Copy port configuration to another port?

    Posted 12-14-2015 15:54
    I got it , thank you