ExtremeSwitching (EXOS)

  • 1.  x450a SNMP Temp sensor not updating

    Posted 02-06-2018 15:13
    My SNMPv2 monitoring server is set to monitor OID (snmp temp sensor) on an extreme x450a (version

    The problem:

    - When the server queries the switch, the switch always reports the same temperature.

    - When I log into the switch (CLI) and run "show temp" or "show snmp get

  • 2.  RE: x450a SNMP Temp sensor not updating

    Posted 02-07-2018 02:50
    Hi Kaon,

    This bug is fixed from
    12.x EXOS versions are end of support, i would recommend to take a look at the below link and upgrade to supported and stable version of EXOS.