ExtremeSwitching (EXOS)

 View Only
  • 1.  Cisco 9970 IP vidoe phones are connected to X440 48p sumit switches, video not working

    Posted 02-23-2017 08:04
    Hello, Cisco 9970 IP phones are connected to X440 48p sumit switches, Problem is video cam will not work. but when the same phone is hooked to Cisco switch it will work. what config do we need to make on XOS that will support the video? we have LLDP config on all XOS devices but video still not working.. please assist..


  • 2.  RE: Cisco 9970 IP vidoe phones are connected to X440 48p sumit switches, video not working

    Posted 02-23-2017 09:21
    hello,
    the Phone might require LLDP-MED options to understand that it can request more PoE power from the switch. So please try to enable the PoE MED options per LLDP.

    configure lldp port 1:1 advertise system-description
    configure lldp port 1:1 advertise system-capabilities
    configure lldp ports 1:1 advertise vendor-specific med capabilities
    configure lldp ports 1:1 advertise vendor-specific med power-via-mdi

    regards
    Bastian
    -



  • 3.  RE: Cisco 9970 IP vidoe phones are connected to X440 48p sumit switches, video not working

    Posted 02-23-2017 13:07
    hello Bastian, thanks for the feedback I am missing on

    configure lldp port 1:1 advertise system-description
    configure lldp port 1:1 advertise system-capabilities

    but the last 2 commands of lldp are are alreadt there, advert system-desc and advert system-capab commands will do any difference?



  • 4.  RE: Cisco 9970 IP vidoe phones are connected to X440 48p sumit switches, video not working

    Posted 02-26-2017 12:33
    Hello,

    how can I manually set in-line power in X440..
    the Cisco IP 99xx series is Class 4 PoE device that may require power up to 25w, can I manually set the power setting on the port itself ?