ExtremeSwitching (EXOS)

Expand all | Collapse all

Problem with CPU and memory monitoring (MIBs)

  • 1.  Problem with CPU and memory monitoring (MIBs)

    Posted 06-04-2014 02:20
    Hi everybody.
    I have some troubles with CPU and memory monitoring on the Solarwinds monitoring system. I've gotten interface statistics, sysname, sysdescription, but I haven't found CPU and memory information.

    Then I try to find ExtremeXOS MIBs, but unfortunately I haven't found it too.

    Where can I find XOS MIBs? Can you give me advice about SNMP monitoring?


  • 2.  RE: Problem with CPU and memory monitoring (MIBs)

    Posted 06-04-2014 10:10
    Hello EyeV the MIBS for XOS are on the esupport support site. If you can't login then call TAC at 18009982408. P


  • 3.  RE: Problem with CPU and memory monitoring (MIBs)

    Posted 06-04-2014 16:59
    Few useful SNMP OID,

    Name extremeCpuMonitorTotalUtilization

    OID .1.3.6.1.4.1.1916.1.32.1.2



    Name extremeCpuMonitorMaxUtilization

    OID .1.3.6.1.4.1.1916.1.32.1.3.1.12



    Name: extremeCpuMonitorCurrentUtilization

    OID .1.3.6.1.4.1.1916.1.32.1.6.0



    Name: extremeSwMonitorCpuUtilization

    OID: .1.3.6.1.4.1.1916.1.32.3.0.1



    Name: extremeMemoryMonitorSystemTable

    OID: .1.3.6.1.4.1.1916.1.32.2.2



    Name extremeMemoryMonitorSystemFree

    OID: .1.3.6.1.4.1.1916.1.32.2.2.1.3



    Name: extremeMemoryMonitorSystemUsage

    OID: .1.3.6.1.4.1.1916.1.32.2.2.1.4



    Name: extremeMemoryMonitorUserUsage

    OID: .1.3.6.1.4.1.1916.1.32.2.2.1.5



    Name: memoryTotal

    OID: .1.3.6.1.4.1.3375.1.1.78.0



    Name: memoryUsed

    OID: .1.3.6.1.4.1.3375.1.1.77.0



    Name: extremeMemoryMonitorSystemUsage

    OID: .1.3.6.1.4.1.1916.1.32.2.2.1.4



  • 4.  RE: Problem with CPU and memory monitoring (MIBs)

    Posted 06-04-2014 16:59
    Hi Summit,

    The values that you post are applicable for BD8810 ? could you provide details of how to achieve the following:

    Need the oid values for BD8810 to monitor on Cacti: Current CPU Utilization per MSM, Memory Utilization (System, User, Free) per MSM, System Storage (Used and Free), and per VLAN L3 Utilization.

    However, If is necessary I can open a case.


  • 5.  RE: Problem with CPU and memory monitoring (MIBs)

    Posted 06-05-2014 02:14
    Thank you Paul and thank you Sumit. I use SNMP-walk and I don't find any 1.3.6.1.4.1.1916.1.32.1 or 1.3.6.1.4.1.1916.1.32.3 OIDs. My list begins from .1.3.6.1.4.1.1916.1.32.2.2.1.3.1.

    Should I change something on the switch or my configuration is enough.

    configure snmp sysName "xxx"
    configure snmp sysLocation "xxx"
    configure snmp sysContact "xxx"
    # Module snmpMaster configuration.
    configure snmpv3 add community $MyRWCommunity$ name $MyName$ user v1v2c_rw
    configure snmpv3 add community $MyROCommunity$ name $MyName$ user v1v2c_ro
    configure snmpv3 add target-addr v1v2cNotifyTAddr1 param v1v2cNotifyParam1 ipaddress 172.30.0.6 transport-port 162 tag-list defaultNotify
    configure snmpv3 add target-params v1v2cNotifyParam1 user v1v2cNotifyUser1 mp-model snmpv2c sec-model snmpv2c sec-level noauth
    disable snmpv3 default-group
    disable snmpv3 default-user
    configure snmp access-profile mgmt-acl readwrite

    entry ManagementACL {
    if match any {
    source-address 172.30.0.0/16;
    source-address 172.20.0.0/16;
    source-address 192.168.0.0/23;
    } then {
    permit;
    }
    }
    [/code]
    P.S. Thank you so much. You really help me.



  • 6.  RE: Problem with CPU and memory monitoring (MIBs)

    Posted 06-05-2014 10:01
    Sorry, I've found it.


  • 7.  RE: Problem with CPU and memory monitoring (MIBs)

    Posted 06-05-2014 12:50
    Can you let us know what information you found?


  • 8.  RE: Problem with CPU and memory monitoring (MIBs)

    Posted 06-06-2014 02:12
    I've found OIDs in my snmpwalk list. Anyway OID .1.3.6.1.4.1.1916.1.32.1.6.0 doesn't work, but other OIDs from your list works perfectly.


  • 9.  RE: Problem with CPU and memory monitoring (MIBs)

    Posted 12-03-2014 11:31
    We have issue with pooling system info (cpu, mem etc.) from X8 with Solarwinds. I also tryed to pull with Paessler and some other snmp tools. some of those OIDS are correct but some do not show usable info.
    I have also troubles importing Extreme Networks MIB file to lot of SNMP tools. What is deal with that. What MIB/OID tool you use that can import Extremes MIB file correctly?

    What OID's to use on X8?


  • 10.  RE: Problem with CPU and memory monitoring (MIBs)

    Posted 05-14-2015 13:39
    Is there a config or concept guide on this one. I have summit switches and 8810's that need I want more viability using Solarwinds.


  • 11.  RE: Problem with CPU and memory monitoring (MIBs)

    Posted 05-14-2015 13:39
    I'm not very familiar with the ins and outs of Solarwinds... Can you import the EXOS MIB into the program to help make configuration easier?


  • 12.  RE: Problem with CPU and memory monitoring (MIBs)

    Posted 05-14-2015 13:39
    I believe so. They have a basic set but always seems like something is missing.

    Is there a config guide or document for all the Extreme snmp OID's?


  • 13.  RE: Problem with CPU and memory monitoring (MIBs)

    Posted 05-14-2015 13:39
    The MIB file is somewhat tied to each EXOS version. If you have access to esupport/extranet, you should be able to download it for your particular version. If you can't find it, let me know what version your EXOS gear is running and I can get it to you.
    Once it's imported, you should be able to browse and search for specific areas of interest.
    I'm not aware of a specific SNMP guide, though one may exist - sorry.


  • 14.  RE: Problem with CPU and memory monitoring (MIBs)

    Posted 05-14-2015 13:39
    Ok Thank you.