ExtremeSwitching (EXOS)

  • 1.  how to configure ssh on extreme X450e-48t

    Posted 12-13-2017 10:04
    please help me to configure ssh over my network, I have the following switch with the following details :

    * AMM-GF-SW05.1 # sh version
    Switch : 800391-00-01 1201G-81983 Rev 1.0 BootROM: 1.0.5.6 IMG: 12.5.1.6
    XGM2-1 : N/A N/A Rev 0.0

    Image : ExtremeXOS version 12.5.1.6 v1251b6 by release-manager
    on Tue Nov 23 09:49:14 PST 2010
    BootROM : 1.0.5.6
    * AMM-GF-SW05.2 # sh switch

    SysName: AMM-GF-SW05
    SysLocation:
    SysContact: support@extremenetworks.com, +1 888 257 3000
    System MAC: 00:04:96:52:FB:75
    System Type: X450e-48t

    SysHealth check: Enabled (Normal)
    Recovery Mode: All
    System Watchdog: Enabled

    Current Time: Wed Dec 13 12:58:53 2017
    Timezone: [Auto DST Disabled] GMT Offset: 0 minutes, name is UTC.
    Boot Time: Sun Apr 9 23:12:16 2017
    Boot Count: 36
    Next Reboot: None scheduled
    System UpTime: 247 days 13 hours 46 minutes 37 seconds

    Current State: OPERATIONAL
    Image Selected: primary
    Image Booted: primary
    Primary ver: 12.5.1.6
    Secondary ver: 12.5.1.6

    Config Selected: primary.cfg
    Config Booted: primary.cfg

    primary.cfg Created by ExtremeXOS version 12.5.1.6
    201155 bytes saved on Tue Dec 12 08:52:56 2017


  • 2.  RE: how to configure ssh on extreme X450e-48t

    Posted 12-13-2017 12:01
    You need to install the SSH mod for that firmware version. I believe you need an active support contract on it to be able to log into the extreme support portal and download the mod.


  • 3.  RE: how to configure ssh on extreme X450e-48t



  • 4.  RE: how to configure ssh on extreme X450e-48t

    Posted 12-13-2017 12:51
    can you give me the link for install the SSH mode


  • 5.  RE: how to configure ssh on extreme X450e-48t