ExtremeSwitching (EXOS)

Expand all | Collapse all

SSL module for x450a24t in home lab environment

  • 1.  SSL module for x450a24t in home lab environment

    Posted 08-24-2017 04:22
    Hi there, i have an x450a24t in a home lab environment, and as such have no warranty or support on this device.I am looking to get HTTPS access setup and I believe i need the ssl module to do this.Does anybody have a copy of this they might be able to let me have or point in the right direction to be able to down load this module it would be much appreciated.Many thanks,Peter


  • 2.  RE: SSL module for x450a24t in home lab environment

    Posted 08-24-2017 05:00
    Hi Peter,

    Please try to log into the download portal and check if you still have the last software available for download at the time of contract expiry with the switch serial number.

    The below is the link to the download portal,

    https://extremeportal.force.com/ExtrLogin?startURL=%2FExtrDownloadLanding


  • 3.  RE: SSL module for x450a24t in home lab environment

    Posted 08-24-2017 05:06
    Yeah I have done. There is nothing there for this switch.


  • 4.  RE: SSL module for x450a24t in home lab environment

    Posted 08-24-2017 05:42
    Hi Peter,

    I cannot think of a way except the software be made available for this serial number with a proper contract.



  • 5.  RE: SSL module for x450a24t in home lab environment

    Posted 08-24-2017 11:24
    With the SSH module installed, try the steps in this article: https://extremeportal.force.com/ExtrArticleDetail?n=000001266



  • 6.  RE: SSL module for x450a24t in home lab environment

    Posted 08-24-2017 18:10
    Hi there, Tried the instructions in the document but it keeps saying ssl module not installed. Have verified that the ssh module is installed and running. Many thanks


  • 7.  RE: SSL module for x450a24t in home lab environment

    Posted 08-31-2017 20:09
    Just wondering if anyone might be able to shed some light as to why the above article didn't work?


  • 8.  RE: SSL module for x450a24t in home lab environment

    Posted 09-01-2017 02:15
    Hi Peter,

    Can you provide the results of a "show version images", "show switch" and "show management"? Please redact any personal information that may be in those outputs. I'm mainly just concerned with the active switch partition, if the xmod is installed, and if its applied to the switch.

    Thanks
    Brad


  • 9.  RE: SSL module for x450a24t in home lab environment

    Posted 09-01-2017 19:15
    Here you go:-

    Home_X450a-24t.1 # show version images
    Card Partition Installation Date Version Name Branch
    ------------------------------------------------------------------------------
    Switch primary Fri Aug 18 07:48:53 UTC 2017 15.3.5.2 summitX-15.3.5.2-patch1-14.xos v1535b2-patch1-14
    Switch primary Wed Aug 23 08:02:43 UTC 2017 15.3.5.2 summitX-15.3.5.2-patch1-14-ssh.xmod v1535b2-patch1-14
    Switch secondary Fri Mar 23 18:55:42 UTC 2012 12.6.2.10 summitX-12.6.2.10-patch1-2.xos v1262b10-patch1-2
    Switch secondary Thu Sep 20 21:18:17 BST 2012 12.6.2.10 summitX-12.6.2.10-patch1-2-ssh.xmod v1262b10-patch1-2

    Home_X450a-24t.2 # show switch

    SysName: Home_X450a-24t
    SysLocation:
    SysContact:
    System MAC: 00:04:96:51:AB:71
    System Type: X450a-24t
    SysHealth check: Enabled (Normal)
    Recovery Mode: All
    System Watchdog: Enabled
    Current Time: Fri Sep 1 21:09:08 2017
    Timezone: [Auto DST Disabled] GMT Offset: 0 minutes, name is UTC.
    Boot Time: Mon Aug 28 05:50:02 2017
    Boot Count: 33
    Next Reboot: None scheduled
    System UpTime: 4 days 15 hours 19 minutes 6 seconds
    Current State: OPERATIONAL
    Image Selected: primary
    Image Booted: primary
    Primary ver: 15.3.5.2
    patch1-14
    Secondary ver: 12.6.2.10
    Config Selected: primary.cfg
    Config Booted: primary.cfg
    primary.cfg Created by ExtremeXOS version 15.3.5.2
    179524 bytes saved on Fri Aug 25 20:27:23 2017

    Home_X450a-24t.3 # show man
    [KHome_X450a-24t.3 # show management
    CLI idle timeout : Enabled (20 minutes)
    CLI max number of login attempts : 3
    CLI max number of sessions : 8
    CLI paging : Enabled (this session only)
    CLI space-completion : Disabled (this session only)
    CLI configuration logging : Disabled
    CLI scripting : Disabled (this session only)
    CLI scripting error mode : Ignore-Error (this session only)
    CLI persistent mode : Persistent (this session only)
    CLI prompting : Enabled (this session only)
    Telnet access : Enabled (tcp port 23 vr all)
    : Access Profile : not set
    SSH access : Enabled (Key valid, tcp port 22 vr all)
    : Access Profile : not set
    Web access : Enabled (tcp port 80)
    : Access Profile : not set
    Total Read Only Communities : 1
    Total Read Write Communities : 1
    RMON : Disabled
    SNMP access : Disabled
    : Access Profile : not set
    SNMP Compatibility Options :
    GETBULK Reply Too Big Action : Too Big Error
    IP Fragmentation : Disallow
    SNMP Notifications : Enabled
    SNMP Notification Receivers : None
    SNMP stats: InPkts 0 OutPkts 0 Errors 0 AuthErrors 0
    Gets 0 GetNexts 0 Sets 0 Drops 0
    SNMP traps: Sent 0 AuthTraps Enabled
    SNMP inform: Sent 0 Retries 0 Failed 0
    Home_X450a-24t.4 #

    Many thanks