ExtremeSwitching (EXOS)

  • 1.  two virtual routers for a trap receiver

    Posted 01-28-2017 14:53
    two virtual routers for a trap receiver


  • 2.  RE: two virtual routers for a trap receiver

    Posted 01-28-2017 15:10
    Hello together,

    i have this config on a working switch:



    Destionation address: [i]:
    Source Adress: [i] of the switch

    now i would like to set the same config on another switch.
    this command works for add the config like show above, but only with the virtual router VR-Default.
    How get i two virtual routers into this config?

    configure snmp add trapreceiver


  • 3.  RE: two virtual routers for a trap receiver

    Posted 01-28-2017 17:15
    Hello Ghost108,

    When I run that command on a lab switch it allows me to select the vr I created

    # create vr vr-test
    # configure snmp add trapreceiver 10.10.10.1 community public vr "vr-test"

    Can you elaborate on your issue?



  • 4.  RE: two virtual routers for a trap receiver

    Posted 01-28-2017 17:16
    yes this works.
    but i would like to set VR-Default AND VR-Mgmt as vr
    but i dont know how

    short explanation:
    i would like to set the same config like the screenshot shows


  • 5.  RE: two virtual routers for a trap receiver

    Posted 01-28-2017 20:16
    If you do not specify a vr it does both by default.


  • 6.  RE: two virtual routers for a trap receiver

    Posted 01-29-2017 07:43
    this was to easy - but i works.
    thx !


  • 7.  RE: two virtual routers for a trap receiver

    Posted 01-30-2017 13:36
    Welcome to The Hub, Ghost!
    It seems this conversation was marked "private" when it was created. Since there doesn't seem to be any private information here, I've changed it to "public."