ExtremeSwitching (EXOS)

Accessing the web GUI - initial setup.

  • 1.  Accessing the web GUI - initial setup.

    Posted 01-07-2014 21:56
    Create Date: Oct 10 2012 6:52PM

    I'm having a pita trying to access the web gui during initial setup.

    I set an IP address to the mgmt vlan, and am able to ping it if I plug a host into the mgmt interface. I can not open 80/443.
    I created a new vlan, assigned it an ip, assigned it to all ports, and still no luck.

    What am I doing wrong?

    Thanks!

    EDIT - I figured this out. I needed to issue the "enable web http" command. (from Jeremy_Homan)