ExtremeSwitching (EXOS)

Expand all | Collapse all

AP register to C35 controller only after controller's reboot

  • 1.  AP register to C35 controller only after controller's reboot

    Posted 01-29-2018 10:04
    Hello, all!

    Have an issue with AP registration.
    Scheme below:
    AP <-> X350 (switch) <-> C35 controller.
    DHCP from FortiGate.
    AP and C35 in the same VLAN.
    C35 = 10.21.04.0005

    AP receive IP from FortiDHCP and don't register on C35.
    When reboot C35 AP's successfully registered.

    When change switch to D-Link DES-3200-10 all normally work - AP registered.

    X350 configuration pretty simple:
    - all (AP and C35) in 1 VLAN
    - try tagged and untagged ports
    - try with different EXOS (15.1.1.6 and 15.3.5.2 patch 1-14)

    Any ideas?

    Thank you!


  • 2.  RE: AP register to C35 controller only after controller's reboot

    Posted 01-29-2018 11:20
    GTAC will probably need to look at the ap.log in the failed state. I would suggest calling in and opening a ticket.



  • 3.  RE: AP register to C35 controller only after controller's reboot

    Posted 01-29-2018 15:14
    Is there an IP address on the X350? Or more specifically, is there an IGMP querier in the network?

    EXOS has IGMP snooping enabled by default, which may be preventing the multicast discovery traffic from making to the AP or controller if there is no IGMP querier.


  • 4.  RE: AP register to C35 controller only after controller's reboot

    Posted 01-29-2018 15:14
    Hello!

    IP present only on vlan Default.
    VLAN with Wi-Fi have no any configuration:
    -> show vlan
    ExtremeWiFi 30 ------------------------------------------------ ANY 5 /6 VR-Default

    So, you mean that try to disable igmp snooping on vlan ExtremeWiFi?

    Thank you!


  • 5.  RE: AP register to C35 controller only after controller's reboot

    Posted 01-29-2018 15:14
    Hello, Brandon!

    Thank you a lot!
    Disable igmp snooping in Wi-Fi vlan is help.


  • 6.  RE: AP register to C35 controller only after controller's reboot

    Posted 01-29-2018 15:14
    Thanks for the follow-up Alexandr


  • 7.  RE: AP register to C35 controller only after controller's reboot

    Posted 01-29-2018 15:14
    You can either disable IGMP snooping on that VLAN, or configure an IP address so the switch can act as an IGMP querier.

    Glad to hear you got this working, Alexandr.