ExtremeSwitching (EXOS)

Expand all | Collapse all

exos snmp oid to set port speed

  • 1.  exos snmp oid to set port speed

    Posted 08-23-2018 12:20
    I want to change the port speed by SNMP. I have a X440 series switch with EXOS operating system. Can somebody tell which oid I need to use?

    Thanks Roland Dal


  • 2.  RE: exos snmp oid to set port speed

    Posted 08-27-2018 06:52
    As per EXOS concepts guide, the OID (ifMauAutoNegAdminStatus) which is part of the ifMauAutoNegTable is mentioned as not supported for SNMP “SET” operations.

    https://documentation.extremenetworks.com/exos_22.2/exos_21_1/configuration_management_enhancements/...


  • 3.  RE: exos snmp oid to set port speed

    Posted 08-27-2018 10:15
    Ok that's clear.

    Is there a Rest API (Perl / Python) available to manipulate the switch settings? If yes where can I found the information? (Sorry I am a new user)

    Thanks for the help.
    Roland Dal


  • 4.  RE: exos snmp oid to set port speed

    Posted 08-27-2018 10:15
    You can use SNMP manager (that is one of Extreme Management Center imminent features, or some standalone thing to modify MIB content on a device), or you can try CLI/TCL scripts (that will be put manually through SSH or via NMS software like XMC), or Python scripts (that can be put and executed on EXOS as a one shot or as a process), or JSONRPC, or (quite fresh - since 22.4) RESTCONF (kinda similar to NETCONF, there is YANG model etc.). You might find this useful: https://api.extremenetworks.com/

    Regards,
    Tomasz