ExtremeSwitching (EXOS)

Expand all | Collapse all

How to config Radius Realm

  • 1.  How to config Radius Realm

    Posted 09-22-2015 22:58
    Form Version 16.x show radius thate has Realm information

    Realm :Any

    from config radius command no include realm parameter.

    Anyone konw how to set this parameter



  • 2.  RE: How to config Radius Realm

    Posted 09-23-2015 05:54
    As per the command reference guide

    "Switch management and network login use the same primary and secondary RADIUS servers for
    authentication (only if the realm is not specified in the command).,"

    The below command should configure the server for both Netlogin and mgmt-access
    "configure radius primary server


  • 3.  RE: How to config Radius Realm

    Posted 09-23-2015 06:25
    Hi Li,

    I guess i misunderstood your question. may be here is the command you are looking for.

    "configure radius 1 server 1.1.1.2 client-ip 1.1.1.1 shared-secret 1234 vr "VR-Mgmt""

    Here in the above command i have only specified the index and not the realm and this server 1.1.1.2 is configured to Realm ANY

    **Truncated output of "show radius**
    Radius server : 1 Status is Active
    host name :
    IP address : 1.1.1.2
    Server IP Port: 1812
    Client address: 1.1.1.1 (VR-Mgmt)
    Retries : 3 *
    Timeout : 3 *
    Realm : Any
    shared secret : #$9D35STS5EPKKghX+lPY=
    Access Requests : 0 Access Accepts : 0
    Access Rejects : 0 Access Challenges : 0
    Access Retransmits: 0 Client timeouts : 0
    Bad authenticators: 0 Unknown types : 0
    Round Trip Time : 0

    I Hope this helps.


  • 4.  RE: How to config Radius Realm

    Posted 09-23-2015 06:36
    "configure radius netlogin 1 server 1.1.1.2 client-ip 1.1.1.1 shared-secret 1234 vr "VR-Mgmt""

    And if you add the netlogin key to the command before the index it will set the Realm to Netlogin

    **Truncated output of "show radius**
    Radius server : 1 Status is Active
    host name :
    IP address : 1.1.1.2
    Server IP Port: 1812
    Client address: 1.1.1.1 (VR-Mgmt)
    Retries : 3 *
    Timeout : 3 *
    Realm : Netlogin
    shared secret : #$9D35STS5EPKKghX+lPY=
    Access Requests : 0 Access Accepts : 0
    Access Rejects : 0 Access Challenges : 0
    Access Retransmits: 0 Client timeouts : 0
    Bad authenticators: 0 Unknown types : 0
    Round Trip Time : 0



  • 5.  RE: How to config Radius Realm

    Posted 06-16-2017 03:03
    GOODNESS U SMART