ExtremeSwitching (EXOS)

Expand all | Collapse all

Switch configuration as up link port

  • 1.  Switch configuration as up link port

    Posted 10-30-2017 17:46
    I have a Xos version 24 port switch and I am going to connect one 12 port switch below the 24 port configuring one port as the tagged port


  • 2.  RE: Switch configuration as up link port

    Posted 10-30-2017 20:07
    Well, i dont mind if you will do that


  • 3.  RE: Switch configuration as up link port

    Posted 10-31-2017 01:44
    so, what is the question?


  • 4.  RE: Switch configuration as up link port

    Posted 10-31-2017 02:58
    I could not able to communicate


  • 5.  RE: Switch configuration as up link port

    Posted 10-31-2017 02:58
    12 port switch having different firm ware and xos having diffrenr


  • 6.  RE: Switch configuration as up link port

    Posted 10-31-2017 03:06
    I still not able to understand. You can reach out to your local Extreme GTAC by phone.


  • 7.  RE: Switch configuration as up link port

    Posted 10-31-2017 03:12
    Hi Jayakumar,

    Can you please provide more information?

    1) Hardware (of both the switches)
    2) Firmware version
    3) How the switches are connected?

    And if you are not able to communicate then from where to where?

    If possible please open a GTAC case to troubleshoot further?

    Regards,
    Karthikeyan



  • 8.  RE: Switch configuration as up link port

    Posted 10-31-2017 05:45
    Summit x440 24 port XOS version 16.1.4.2 patch 1-3


  • 9.  RE: Switch configuration as up link port

    Posted 10-31-2017 05:47
    Extreme 210 -12 p - Gen 2 we don’t have any version


  • 10.  RE: Switch configuration as up link port

    Posted 10-31-2017 05:48
    Switches are connected As normal


  • 11.  RE: Switch configuration as up link port

    Posted 10-31-2017 05:48
    24 port switch to 12 port switch


  • 12.  RE: Switch configuration as up link port

    Posted 11-01-2017 07:26
    Hi Jayakumar,

    We still miss lots of information. What's the configuration on those connected ports currently on both the switches. Would suggest to open a TAC case and work on this further.

    Regards,
    Karthikeyan