ExtremeSwitching (EXOS)

Expand all | Collapse all

Adding a second PSU 10931 module on X460

  • 1.  Adding a second PSU 10931 module on X460

    Posted 05-30-2017 06:52
    Dear Community
    If I want to add a second internal power supply to a Summit X460, should I first switch off the switch, or can you connect the PSU 10931 module "hot"?
    Is there any configuration ?
    regards
    Eva


  • 2.  RE: Adding a second PSU 10931 module on X460

    Posted 05-30-2017 07:08
    Hi,

    PSU is hot swappable. You can directly connect to the PSU to the switch and there is no configuration to be done on the switch.



  • 3.  RE: Adding a second PSU 10931 module on X460

    Posted 06-02-2017 02:43
    I could see my colleague Naresh has already answered for your queries here. But to add more to this in case if you want to know the PSUs which are all compatible with X460G2 hardware then before adding them to the device better to cross verify this link below to find out the compatible PSUs for the same hardware in the future:

    https://gtacknowledge.extremenetworks.com/articles/Q_A/Which-PSUs-are-compatible-with-the-Summit-X46...

    Let us know if you have any further queries to address here......