ExtremeSwitching (EXOS)

  • 1.  Unconfigure EAPS - Step by step

    Posted 03-15-2016 14:46
    Hi everybody,

    I need delete all EAPS configuration, please confirm:

    disable "Eaps_name_1"

    unconfigure "Eaps_name_1" primary port

    unconfigure "Eaps_name_1" secondary port

    delete "Eaps_name_1"

    that's right??

    Thanks a lot!



  • 2.  RE: Unconfigure EAPS - Step by step

    Posted 03-15-2016 14:50
    Hi Oscar,

    I believe you can just skip to delete the EAPS name but doing it this way wont hurt anything.


  • 3.  RE: Unconfigure EAPS - Step by step

    Posted 03-15-2016 15:06
    it's necessary delete vlan port member?



  • 4.  RE: Unconfigure EAPS - Step by step

    Posted 03-15-2016 15:14
    You should be able to delete the EAPS name and it will remove all other configuration. This can be verified by attempting that command and then running "show config eaps"


  • 5.  RE: Unconfigure EAPS - Step by step

    Posted 03-15-2016 15:40
    Ok Patrick thanks a lot!


  • 6.  RE: Unconfigure EAPS - Step by step

    Posted 03-16-2016 13:09
    Oscar,

    Just make sure, before deleting EAPS, that the ring is open, or you'll generate a nice loop in your network!

    If you are not sure of the cabling status, disable the secondary port in the Master switch (which is what the EAPS master normally does...)