ExtremeSwitching (EXOS)

Expand all | Collapse all

Unable to Add L2

  • 1.  Unable to Add L2

    Posted 06-20-2017 07:24
    Hi,

    I am getting below messages in switch log. The release which i am using on BD8806 is 15.3.3.5 patch1-4

    06/20/2017 09:15:20.27


  • 2.  RE: Unable to Add L2

    Posted 06-20-2017 10:31
    Hi Wagas,

    Please refer to the following knowledge base article for an explanation on the "Unable to Add L2" IPMC kernel errors, including steps you can attempt to address the issue, as well as referenced CR numbers for known related issues, and the EXOS version they have been fixed in:

    https://gtacknowledge.extremenetworks.com/articles/Solution/Unable-to-Add-L2

    Please review the article and let us know if you have any questions.
    Thank you.

    Best regards,
    Andrew



  • 3.  RE: Unable to Add L2

    Posted 06-20-2017 22:02
    Hello Wagas,

    Kindly inform you that the recommended release of BD8800 series is EXOS 16.2.2.4.
    http://www.extremenetworks.com/extreme-hardwaresoftware-compatibility-recommendation-matrices/softwa...

    Best regards,
    Bin