ExtremeSwitching (VSP)

Expand all | Collapse all

How to configure Native VLAN on Extreme X440 switch?

  • 1.  How to configure Native VLAN on Extreme X440 switch?

    Posted 12-26-2017 04:55
    How to configure Native VLAN on Extreme X440 switch?


  • 2.  RE: How to configure Native VLAN on Extreme X440 switch?

    Posted 12-26-2017 05:03
    Hi Alok,

    We do not have the concept of a Native VLAN in EXOS. We can however add a VLAN as untagged on a port which will exhibit similar behavior.
    https://gtacknowledge.extremenetworks.com/articles/How_To/Understanding-EXOS-VLANS-and-tagged-and-un...
    This article explains about how VLAN tagging works in EXOS. I hope this will clear things up for you.


  • 3.  RE: How to configure Native VLAN on Extreme X440 switch?

    Posted 12-26-2017 05:15
    How do we change native VLAN default to other ?


  • 4.  RE: How to configure Native VLAN on Extreme X440 switch?

    Posted 12-26-2017 06:16
    Hello Alok,

    Firstly you must remove untagged port from vlan "default"

    conf vlan Default del port <#_num> [/code]And then add that port to required VLAN as untagged

    conf vlan