ExtremeSwitching (VSP)

Expand all | Collapse all

VSP 8400 - Stuck on Status amber blinking - No output on console

  • 1.  VSP 8400 - Stuck on Status amber blinking - No output on console

    Posted 02-03-2019 07:00
    We have factory default our CoreSwitch2 - VSP 8400, after the factory default no cli output on screen and stuck on Status=Amber blinking. Anyone could help our issue. Thank you.


  • 2.  RE: VSP 8400 - Stuck on Status amber blinking - No output on console

    Posted 02-04-2019 14:14
    Hi Eric,

    First question would be: What was the reason for Factory Defaulting the box ?
    Second Question: Was it working fine before factory defaulting it?

    Regards,
    DILRAJ


  • 3.  RE: VSP 8400 - Stuck on Status amber blinking - No output on console

    Posted 02-04-2019 15:15
    What console setting are you using? The default baud rate for VSP 8400 is 9600. It your console is working with other switches but not this one, I am afraid it is broken and you have to RMA it.


  • 4.  RE: VSP 8400 - Stuck on Status amber blinking - No output on console

    Posted 02-06-2019 11:36
    If you are able to see CLI outputs on switch bootup process then it might be possible to recover without RMA. If not then replacement is needed.


  • 5.  RE: VSP 8400 - Stuck on Status amber blinking - No output on console

    Posted 02-12-2019 08:50
    Same on my problem, may I know what is the possible causes of this issue. can you explain? thank you