ExtremeSwitching (VSP)

Expand all | Collapse all

nat-pat setting on enterasys xp 2400-256

  • 1.  nat-pat setting on enterasys xp 2400-256

    Posted 01-07-2018 19:21
    I have an Enterasys X-Pedition 2400 256 and i'm trying to set a nat pat, but i couldn't make it work yet. I couldn't find enough resources to understand how to set pat on this model of switch so i've been just crashing my head on wall to accomplish it :(
    Could someone explain me how could i do it or give me some tips? Any help is welcome!

    Below are the configurations i've tried so far. Where it should be a public IP i replaced by "pu.bl.ic.ip"

    vlan create externa port-based id 2054
    vlan create interna port-based id 2

    vlan add ports et.2.8 to externa
    vlan add ports et.2.(6-7) to interna

    interface create ip en2 address-netmask 192.168.2.1/24 vlan interna up
    interface create ip en8 address-netmask pu.bl.ic.ip/24 vlan externa up

    acl lcl2 permit ip 192.168.2.0/24

    ip add route 192.168.2.0/24 gateway 192.168.2.1
    ip add route default gateway pu.bl.ic.254

    dhcp scope2 define parameters address-netmask 192.168.2.1/24 gateway 192.168.2.1
    dhcp scope2 define pool 192.168.2.2-192.168.2.3

    nat set interface en2 inside
    nat set interface en8 outside
    nat create dynamic enable-ip-overload local-acl-pool lcl2 global-pool pu.bl.ic.ip



  • 2.  RE: nat-pat setting on enterasys xp 2400-256

    Posted 01-07-2018 20:28
    hmm impressive. nice to know someone is still using this historical product.

    Try examples in documentation:

    http://www.logan.com/ssr/xp9191/user.pdf page 359
    good luck!

    Z.


  • 3.  RE: nat-pat setting on enterasys xp 2400-256

    Posted 01-10-2018 13:39
    Thanks, i could do it!